Dräger IACS on Dräger Atlan 350

VHM-P (Non-Locking) Variable Height Arm with VESA Mounting Plate

Details

Dräger IACS C500/C700 Arm Options

VHM-P (Non-Locking) Variable Height Arm with VESA Mounting Plate

Load Range: 15 to 30 lb /6.8 to 13.6 kg

Patent Pending

WS-0012-10

VHM-P (Non-Locking) Variable Height Arm with 8" / 20.3 cm Extension and VESA Mounting Plate

Load Range: 15 to 30 lb /6.8 to 13.6 kg

Patent Pending

WS-0012-31

Details

12” / 30.5 cm Fluted Post for M Series / VHM Arms

12" / 30.5 cm fluted post for attachment of devices with a clamp interface
Post Diameter: 1.25" / 3.2 cm
For M / VHM/ VHM-P/PL Series arms

WMM-0006-02

Details

PRC™ Post/Rail Clamp with VESA Mounting Plate

Clamp range for Posts: .75 – 1.5”/19 - 38 mm diameter
Rail clamp range: 10 x 25 mm
VESA 75 /100 mm compatible
Tilt and swivel adjustments
Max load is 25 lb / 11.4 kg

Clamp range for Posts: .75 – 1.5”/19 - 38 mm diameter
Rail clamp range: 10 x 25 mm
VESA 75 /100 mm compatible
Tilt and swivel adjustments
Max Load Post Mount: 25 lbs /11.4 kg
Max Load Rail Mount: 15 lbs /6.8 kg

FLP-0008-17

Details

Drager P2500 Power Supply Slide-In Flush Channel Mount

DR-0044-20

Dräger PS250/P2500 Power Supply Flush Mount

SI-0032-10

Recommended Accessories

Details

Monitor Handles

Works with GCX display mounts to allow easy position adjustments for the display without having to grab the display enclosure
12 - 25" / 30 - 63 cm Wide
Vertical, lateral and tilt adjustments are facilitated by the padded grips located to the left and right sides
Padded grip handles can be installed facing up or down
Mounts between display and GCX mounting plate
Product weight: 3.4 lb / 1.5 kg

FLP-0008-64

Details

Dual Cable Hooks for Cable Management

Hooks for cable management below an arm
Swivel adjustment allows positioning of the hooks as desired (limited range of motion when used with VHM variable height arm)
Product weight: .2 lb / .1 kg
Maximum Load Per Hook: 3 lbs /1/4 kg
Note: Not for use with VHM-25 Variable Height Arm.

Hooks for cable management below an arm
Swivel adjustment allows positioning of the hooks as desired (limited range of motion when used with VHM variable height arm)
Product weight: .2 lb /.1 kg
Maximum Load per hook: 2.5 lbs /1.13 kg each

Note: Not for use with VHM-25 Variable Height Arm.

WMM-0006-04

Reset choices

Tip Stability Warning

GCX manufactures mounting hardware for a variety of patient monitoring equipment and related devices. The configurations shown are provided for reference only and are intended to show the components available for building a complete workstation. Due to the significant variations in anesthesia machines and related equipment, GCX makes no claims regarding the tip stability or overall safety of the final configuration. It is the responsibility of the healthcare institution to ensure that the configuration—the anesthesia machine and all components set on, or mounted to, it—is safe.