VHM-P (Non-Locking) Variable Height Arm with 8" / 20.3 cm Extension and Fixed Angle Front End for L Brackets

• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel adjustments for optimal viewing angle
• 8″/20.3 cm Rear extension
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• Fixed angle front end for L Bracket connection
• Add up the weights of all devices, including GCX mounting accessories, to ensure the total weight is within the arm’s weight range
• Load Range: 25 to 45 lb / 11.3 to 20.4 kg

• Load Range: 25 to 45 lb / 11.3 to 20.4 kg

Patent pending

Monitor and Keyboard L Bracket

• Provides a compact mounting solution for the monitor and keyboard
• Independent monitor height and tilt adjustment
• Swivel adjustment (monitor and keyboard in unison)
• Folding keyboard
• 9.5” / 24.1 cm from the wall in the folded position
• Monitor mount maximum load: 30 lb / 13.6 kg
• Weight: 7.2 lb / 3.3 kg

Note: Keyboard tray sold separately.

20.8" / 52.8 cm Ergo Keyboard Tray with Wrist Rest, Slide-Out Mouse Trays and Bottom Cover

• Tray (20.8″ / 52.8 cm wide) for standard keyboard with left/right slide-out keyboard trays
• Slide-out mouse trays: 8 x 6.5″ / 20.3 x 16.5 cm
• Padded wrist rest
• Mouse house, mouse pads
• Product weight: 6.2 lb / 2.8 kg
• Note: Not for use with FLP-0004-83 or FLP-0004-97.

GE Corometrics 250cx Fetal Monitor Mount

• GE Corometrics 250cx Series Mount with paper catcher
• Drawer and four (4) quick release side accessory baskets
• Four (4) quick release baskets: Dimensions 6.25″/15.9 cm w x 3.5″/8.9 cm h

GE Corometrics 170 Series Adapter Plate

• Adapter plate secures the GE Corometrics 170 to the Fetal Monitoring mount

49" / 124.5 cm Seismic Channel

• Seismic 49″ / 124.5 cm wall channel
• Includes mounting hardware and instructions
• OSHPD Pre-Approval: WC-0002-03, -05, -07, -09, -11, and -15

Note: Channel covers not included

• Product Weight: 6.05 lbs / 2.74 kg

Channel Mount for 1.5 to 3"/3.8 to 7.6 cm wide CPU

• Max. load: 25 lb / 11.3 kg
• Max. height: 14″ / 35.6 cm
• Max. depth: 14″ / 35.6 cm
• Weight: 4.5 lb / 2 kg

Channel Mount for 3 to 4.5"/7.6 to 11.4 cm wide CPU

• Max. load: 25 lb / 11.3 kg
• Max. height: 14″ / 35.6 cm
• Max. depth: 14″ / 35.6 cm
• Weight: 5 lb / 2.3 kg

Channel Mount for 4.5 to 7"/11.4 to 17.8 cm wide CPU

• Max. load: 40 lb / 18.2 kg
• Max. height: 18″ / 45.7 cm
• Max. depth: 18″ / 45.7 cm
• Weight: 16 lb / 7.3 kg
• Note: Requires a channel longer than 7″ / 17.8 cm to accommodate two (2) slides

Channel Mount for 7 to 9.5"/17.8 to 24.1 cm wide CPU

• Max. load: 40 lb / 18.2 kg
• Max. height: 18″ / 45.7 cm
• Max. depth: 18″ / 45.7 cm
• Weight: 18 lb / 8.2 kg
• Note: Requires a channel longer than 7″ / 17.8 cm
• Note: For rear VHRC/RC configurations, requires two (2) Rear Cleats

Monitor/Keyboard Bracket Work Surface

• Work surface is compatible with the L-Bracket, sitting directly behind the keyboard tray
• Work surface dimensions: 20”/50.8 cm wide x 6.75”/17.1 cm deep
• Right/left smooth writing areas: 6.5”/16.5 cm x 6.5”/16.5 cm
• Center recessed tray area: 6.5”/16.5 cm wide x 3.5”/8.89 cm deep, recess is .25”/.6 cm deep (front is narrower at 5.5”/14 cm wide)
• Chemical resistant material
• Product weight: 1.8 lbs/.8 kg

16" / 40.6 cm M Series Pivot Arm with Slide-In Mounting Plate

• Offers a pivot point at the wall channel for lateral adjustability and tilt/swivel adjustment
• Features range of motion from flush to full extension, and cable management
• Slide-In Mounting Plate
• Accommodates back or bottom mounted devices
• Tilt Mechanism Maximum Load: 30 lbs / 13.6 kg
• Total Arm Maximum Load: 50 lb / 22.7 kg

Note: Channel sold separately

• Tilt Mechanism Maximum Load: 30 lbs / 13.6 kg
• Total Arm Maximum Load: 50 lb / 22.7 kg

GE Mini Telemetry Receiver Adapter Plate