F.A.Q. Category: Produkte & Lösungen

Does GCX have a mounting solution for a Barcode Scanner Mount for Zebra DS8178?

November 30, 2020 auf

We have created a new generic adapter for barcode scanners, Part Number: BCR-0001-17. Installationsanleitungen DU-BCR-0001-17    

Lesen Sie weiter

Can I convert an HP Monitor Roll Stand to GE Dash 5000 with a missing plate?

November 30, 2020 auf

Yes, you can by using GCX part number WM-0005-26. Installationsanleitungen DU-WM-0005 Rev A    

Lesen Sie weiter

Is it possible to convert the mount for the Spacelabs SL Qube Mini to the Capnostream 20 Roll Stand?

November 30, 2020 auf

RS-0025-05 is rated for 12 lbs /​5.5 kg and the Capnostream 20 weighs 6.2 lbs /​2.8 kg, so you can use FLP-0002-17 as a monitor interface and PRC-0001-02 to mount to the roll stand....

Lesen Sie weiter

What are your product colors?

November 30, 2020 auf

Typically, GCX products are Central Office White (RGB: 218, 216, 209 /​RAL (Effect): RAL 840-2 and RAL 110-2 /​CIE Lab: 86.37, -0.16, 3.71).    

Lesen Sie weiter

Can we replace a broken Swivel Cup that holds a Down Post at the front of a GCX arm?

November 30, 2020 auf

For safety reasons, you’ll need to replace the entire front end of the arm. The replacement kit part number varies depending on what device is mounted to the arm. Contact a GCX...

Lesen Sie weiter

What is the part number for the end cap that fits to the top of the VHRC front channel?

November 30, 2020 auf

The part number is RST0007P22A.    

Lesen Sie weiter

Can a Philips X3 Swivel Post Rail/Clamp be mounted on a 3” / 1.2 cm Down Post with Dual Cable Hooks?

November 30, 2020 auf

The Philips X3 can be mounted only on the Classic VHM using the shorter 3″ /​1.2 cm down post. If using the GCX VHM-P or VHM-PL version variable height arm, a 6″...

Lesen Sie weiter

Can a broken 1.25” / 32mm flush mount clamp assembly be replaced?

November 30, 2020 auf

Yes, sub-assembly number ME-0031-18 contains everything in the picture below, except for the vertical post. Note that this assembly is only compatible with 1.25” /​32mm diameter posts. Installationsanleitungen DU-ME-0031-13 | Einstellbare...

Lesen Sie weiter

How do I adjust the tension on the tilt mechanism at the front of an arm?

November 30, 2020 auf

This adjustment procedure is described in the document linked below, along with a number of other useful arm adjustments. Installationsanleitungen DU-WS-0001 | Installationsanleitung für VHM    

Lesen Sie weiter

What is the part number for the GCX Manual Ratchet Lever?

November 30, 2020 auf

The part number is WM-0017-92. This part is used to adjust the tension on the tilt mechanism. Note that it has an internal ratchet that requires you to lift up...

Lesen Sie weiter

Blog-Kategorien