F.A.Q. Category : Produits et solutions

Does GCX have a mounting solution for a Barcode Scanner Mount for Zebra DS8178?

novembre 30, 2020 En

We have created a new generic adapter for barcode scanners, Part Number: BCR-0001-17. Guides d’installation DU-BCR-0001-17    

Lire la suite

Can I convert an HP Monitor Roll Stand to GE Dash 5000 with a missing plate?

novembre 30, 2020 En

Yes, you can by using GCX part number WM-0005-26. Guides d’installation DU-WM-0005 Rev A    

Lire la suite

Is it possible to convert the mount for the Spacelabs SL Qube Mini to the Capnostream 20 Roll Stand?

novembre 30, 2020 En

RS-0025-05 is rated for 12 lbs /​5.5 kg and the Capnostream 20 weighs 6.2 lbs /​2.8 kg, so you can use FLP-0002-17 as a monitor interface and PRC-0001-02 to mount to the roll stand....

Lire la suite

What are your product colors?

novembre 30, 2020 En

Typically, GCX products are Central Office White (RGB: 218, 216, 209 /​RAL (Effect): RAL 840-2 and RAL 110-2 /​CIE Lab: 86.37, -0.16, 3.71).    

Lire la suite

Can we replace a broken Swivel Cup that holds a Down Post at the front of a GCX arm?

novembre 30, 2020 En

For safety reasons, you’ll need to replace the entire front end of the arm. The replacement kit part number varies depending on what device is mounted to the arm. Contact a GCX...

Lire la suite

What is the part number for the end cap that fits to the top of the VHRC front channel?

novembre 30, 2020 En

The part number is RST0007P22A.    

Lire la suite

Can a Philips X3 Swivel Post Rail/Clamp be mounted on a 3” / 1.2 cm Down Post with Dual Cable Hooks?

novembre 30, 2020 En

The Philips X3 can be mounted only on the Classic VHM using the shorter 3″ /​1.2 cm down post. If using the GCX VHM-P or VHM-PL version variable height arm, a 6″...

Lire la suite

Can a broken 1.25” / 32mm flush mount clamp assembly be replaced?

novembre 30, 2020 En

Yes, sub-assembly number ME-0031-18 contains everything in the picture below, except for the vertical post. Note that this assembly is only compatible with 1.25” /​32mm diameter posts. Guides d’installation DU-ME-0031-13 |...

Lire la suite

How do I adjust the tension on the tilt mechanism at the front of an arm?

novembre 30, 2020 En

This adjustment procedure is described in the document linked below, along with a number of other useful arm adjustments. Guides d’installation DU-WS-0001 | Support de hauteur variable (VHM)    

Lire la suite

What is the part number for the GCX Manual Ratchet Lever?

novembre 30, 2020 En

The part number is WM-0017-92. This part is used to adjust the tension on the tilt mechanism. Note that it has an internal ratchet that requires you to lift up...

Lire la suite

Catégories de blogs