• Load Range: 25 to 45 lb /​11.3 to 20.4 kg

Patent Pending

• Load Range: 15 to 30 lb /​6.8 to 13.6 kg

Patent Pending

• Includes L Bracket, Keyboard Tray with Slide-out Mouse Trays/Mouse Pads, Work Surface, Storage Bins
• Work surface provides three positions:  Over the keyboard for writing/general tasks, Tilted up to support documents, Behind the keyboard for storage/general tasks.
• Work surface dimensions: 18.3”/46.5 cm wide x 9”/22.9 cm deep
• Plastic bins behind the keyboard tray for storage of barcode scanner, mouse, etc., easily removable for cleaning
• Enhanced keyboard tray provides rigid mouse trays and smooth underside for improved aesthetics when stowed in fold up position -- Suitable for keyboards secured by use of magnets.
• Adjustable keyboard tilt (to minus 10 degrees)
• Cable passage above keyboard tray & below work-surface module to facilitate cable management.
• Flat panel height and tilt angle adjustments – 75/100mm VESA compatible.
• Product weight: 15 lb / 6.8 kg
• Maximum flat panel weight for WS-0012-11 arm: 25 lb / 11.3 kg*
• Maximum flat panel weight for WS-0012-13 arm: 10 lb / 4.5 kg*

*This leaves ~ 5 lb / 2.3 kg for keyboard, accessories, cables, etc.

Patent Pending

• Max. load: 25 lb /​11.3 kg
• Max. height: 14″ /​35.6 cm
• Max. depth: 14″ /​35.6 cm
• Weight: 4.5 lb /​2 kg

• Max. load: 25 lb /​11.3 kg
• Max. height: 14″ /​35.6 cm
• Max. depth: 14″ /​35.6 cm
• Weight: 5 lb /​2.3 kg

• Max. load: 40 lb /​18.2 kg
• Max. height: 18″ /​45.7 cm
• Max. depth: 18″ /​45.7 cm
• Weight: 16 lb /​7.3 kg
• Note: Requires a channel longer than 7″ /​17.8 cm to accommodate two (2) slides

• Max. load: 40 lb /​18.2 kg
• Max. height: 18″ /​45.7 cm
• Max. depth: 18″ /​45.7 cm
• Weight: 18 lb /​8.2 kg
• Note: Requires a channel longer than 7″ /​17.8 cm
• Note: For rear VHRC/​RC configurations, requires two (2) Rear Cleats

• Works with GCX display mounts to allow easy position adjustments for the display without having to grab the display enclosure
• 12 - 25" / 30 - 63 cm Wide
• Vertical, lateral and tilt adjustments are facilitated by the padded grips located to the left and right sides
• Padded grip handles can be installed facing up or down
• Mounts between display and GCX mounting plate
• Product weight: 3.4 lb / 1.5 kg