• 21"/53.3 cm base
• 46"/162.6 cm off set post
• 5"/12.7 cm slide in plate
• Handle
• 6"/15.2 cm basket

Mounting Adapter For Spacelabs 91370 (SL2600), 91369 (SL2400), 90369 (UV1050) and 91220 (mCare 300)

• Universal holster to securely mount a variety of power supply units
• Max size: 4” x 4”/10.2 cm x 10.2 cm or 16''/40.6 cm perimeter
• Min size: 1.4'' x 2.3''/3.6 cm x 5.8 cm or 7.4''/18.8 cm perimeter
• Can be vertically or horizontally oriented
• Includes 12"/30.5 cm and 18"/45.7 cm Velcro straps and cleat for cable management

• Base/casters/post
• Handle
• Basket with cord loops
• Mount for one module housing
• Mount for two power supplies
• Cable cleat

• Single wide yoke module
• Hook for cable management

• VHM Variable height support arm allows vertical and lateral positioning adjustments.
• 5" (12.7 cm) slide in plate
• 19" (48.3 cm) seismic wall channel
• Channel cover

• 12" (30.5cm) M-Series Pivot Arm allows lateral positioning and tilt/swivel adjustment features
• 5" (12.7 cm) slide in plate
• 19" (48.3 cm) seismic wall channel
• Channel cover
• Utility hook

• 21"/53.3 cm base
• 46"/162.6 cm off set post
• 5"/12.7 cm slide in plate
• Handle
• 6"/15.2 cm basket

• 12"/30.5 cm x 12"/30.5 cm M Series Articulating Arm allows lateral positioning, tilt/swivel adjustments, and cable management.
• Pivots at the channel and midway for lateral positioning and extension.
• 75/100 mm mounting adapter plate

• M-Series/VHM compatable hanger to hold module
• Dual Power supply wall mount crossmember
• Includes 6" (15.2 cm)  and 9" (22.9 cm) downposts
• Includes mounting adapter

• 8”/20.3 cm M Series Pivot Arm provides lateral position adjustment and cable management
• Cable hook
• 5"/12.7 cm slide in plate

Adapter kit for mounting Spacelabs module housing on slide in mounting plate

• Secures two (2) power supplies side by side.
• Each holster holds a power supply
• Max size: 4" (10.2 cm) x 4" (10.2 cm) - 16" (40.6 cm) total perimeter.
• Min size: 2.4" (6.1 cm) x 1.3" (3.3 cm) - 7.4" (18.8 cm) total perimeter.

• 16"/40.6 cm M-Series Arm allows lateral positioning, tilt/swivel adjustments, and cable management.
• Pivot stop limits rear rotation
• Utility cable hooks
• 5"/12.7 cm slide in plate
• Channel covers for cable management

• Hanger assembly with optional 6" (15.2 cm) down post
• Single hook attachment for cable management
• Gas module adapter plate

• Universal holster to securely mount a variety of power supply units
• Max size: 4”/10.2 cm x 4”/10.2 cm or 16''/40.6 cm perimeter
• Min size: 1.4''/3.6 cm x 2.3''/5.8 cm or 7.4''/18.8 cm perimeter
• Can be vertically or horizontally oriented
• Includes 12"/30.5 cm and 18"/45.7 cm Velcro Straps and cleat for cable management
• Product weight: .5 lbs/.23 kg

Mounting Adapter For Spacelabs 91370 (SL2600), 91369 (SL2400), 90369 (UV1050) and 91220 (mCare 300)

• VHM Provides lateral positioning, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle.
• Features a parallel linkage for constant viewing angle throughout range of motion.
• Compatible with flat panels - VESA 100 or 75 mm mounting configurations.
• VESA adapter included
• 19" (48.3 cm) channel
• Single power supply holster

(Optional) Ultraview Module Housing Hanger (GCX P/N: SL-0032-88)

Dual Power Supply Holster (GCX P/N: SL-0037-18)

• 16"/40.6 cm M Series Arm allows lateral positioning, tilt/swivel adjustments, and cable management.
• Pivot stop limits rear rotation
• 75/100 mm VESA mounting adapter plate

• 8”/20.3 cm M Series Pivot Arm provides lateral position adjustment and cable management
• Cable hook
• 5"/12.7 cm slide in plate

• Hanger assembly with optional 6" (15.2 cm) down post
• Single hook attachment for cable management
• Gas module adapter plate

Adapter kit for mounting Spacelabs module housing on slide in mounting plate

• Heavy duty VHM allows mounting abilities for Spacelab gas module
• VHM Provides lateral positioning, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle.
• Features a parallel linkage for constant viewing angle throughout range of motion.
• Compatible with flat panels - VESA 100 or 75 mm mounting configurations.
• 19" (48.3 cm) Channel
• Channel cover for cable management
• Power supply holster

 Note: This kit may be used for mounting flat panels compliant with the VESA mounting standard.

• Provides a compact mounting solution for the flat panel display and keyboard.
• Display and keyboard tilt is adjustable (in unison).
• Display height is adjustable to accommodate larger displays and user preferences.
• 20.75" (52.7 cm) wide tray for standard keyboard with left/right 8" (20.3 cm) x 6.5" (16.5 cm) slide out mouse trays.
• Padded wrist rest
• 6.5" (16.5 cm) x 5" (12.7 cm) embossed PVC mouse surface (both sides)
• Powder coat paint finish for durability

Mounting Adapter For Spacelabs 91370 (SL2600), 91369 (SL2400), 90369 (UV1050) and 91220 (mCare 300)

• VHM™ Variable height support arm allows vertical and lateral positioning adjustments.
• 19" (48.3 cm) seismic wall channel
• Channel cover
• Optional: Power Supply Holster, GCX P/N WM-0024-03

Note: This kit may also be used for mounting the Spacelabs 1030/1050.

• 16"/40.6 cm M Series Arm allows lateral positioning, tilt/swivel adjustments, and cable management.
• Pivot stop limits rear rotation
• 75/100 mm VESA mounting adapter plate

• Hanger assembly with optional 6" (15.2 cm) down post
• Single hook attachment for cable management
• Gas module adapter plate

• 8”/20.3 cm M Series Pivot Arm provides lateral position adjustment and cable management
• Cable hook
• 5"/12.7 cm slide in plate

Adapter kit for mounting Spacelabs module housing on slide in mounting plate

• Secures two (2) power supplies side by side.
• Each holster holds a power supply
• Max size: 4" (10.2 cm) x 4" (10.2 cm) - 16" (40.6 cm) total perimeter.
• Min size: 2.4" (6.1 cm) x 1.3" (3.3 cm) - 7.4" (18.8 cm) total perimeter.

• 16"/40.6 cm M-Series Arm allows lateral positioning, tilt/swivel adjustments, and cable management.
• Pivot stop limits rear rotation
• Utility cable hooks
• 5"/12.7 cm slide in plate
• Channel covers for cable management

• Universal holster to securely mount a variety of power supply units
• Max size: 4”/10.2 cm x 4”/10.2 cm or 16''/40.6 cm perimeter
• Min size: 1.4''/3.6 cm x 2.3''/5.8 cm or 7.4''/18.8 cm perimeter
• Can be vertically or horizontally oriented
• Includes 12"/30.5 cm and 18"/45.7 cm Velcro Straps and cleat for cable management
• Product weight: .5 lbs/.23 kg

Mounting Adapter For Spacelabs 91370 (SL2600), 91369 (SL2400), 90369 (UV1050) and 91220 (mCare 300)

• 12"/30.5 cm x 12"/30.5 cm M Series Articulating Arm allows lateral positioning, tilt/swivel adjustments, and cable management.
• Pivots at the channel and midway for lateral positioning and extension.
• 75/100 mm mounting adapter plate

• 16"/40.6 cm M-Series Arm allows lateral positioning, tilt/swivel adjustments, and cable management.
• Pivot stop limits rear rotation
• Utility cable hooks
• 5"/12.7 cm slide in plate
• Channel covers for cable management

• Hanger assembly with optional 6" (15.2 cm) down post
• Single hook attachment for cable management
• Gas module adapter plate

• Universal holster to securely mount a variety of power supply units
• Max size: 4”/10.2 cm x 4”/10.2 cm or 16''/40.6 cm perimeter
• Min size: 1.4''/3.6 cm x 2.3''/5.8 cm or 7.4''/18.8 cm perimeter
• Can be vertically or horizontally oriented
• Includes 12"/30.5 cm and 18"/45.7 cm Velcro Straps and cleat for cable management
• Product weight: .5 lbs/.23 kg

Mounting Adapter For Spacelabs 91370 (SL2600), 91369 (SL2400), 90369 (UV1050) and 91220 (mCare 300)

• Universal holster to securely mount a variety of power supply units
• Max size: 4”/10.2 cm x 4”/10.2 cm or 16''/40.6 cm perimeter
• Min size: 1.4''/3.6 cm x 2.3''/5.8 cm or 7.4''/18.8 cm perimeter
• Can be vertically or horizontally oriented
• Includes 12"/30.5 cm and 18"/45.7 cm Velcro Straps and cleat for cable management
• Product weight: .5 lbs/.23 kg

Mounting Adapter For Spacelabs 91370 (SL2600), 91369 (SL2400), 90369 (UV1050) and 91220 (mCare 300)

• 12” (30.5cm) M-Series Pivot Arm allows lateral positioning and tilt/swivel adjustment features
• 19" (48.3 cm) seismic wall channel
• Channel cover
• Utility hook

Note: This kit may also be used for mounting the Spacelabs 1030/1050.

• Heavy duty VHM allows mounting abilities for Spacelab gas module
• VHM Provides lateral positioning, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle.
• Features a parallel linkage for constant viewing angle throughout range of motion.
• Compatible with flat panels - VESA 100 or 75 mm mounting configurations.
• 19" (48.3 cm) Channel
• Channel cover for cable management
• Power supply holster

 Note: This kit may be used for mounting flat panels compliant with the VESA mounting standard.

• M-Series/VHM compatable hanger to hold module
• Dual Power supply wall mount crossmember
• Includes 6" (15.2 cm)  and 9" (22.9 cm) downposts
• Includes mounting adapter

Mounting Adapter For Spacelabs 91370 (SL2600), 91369 (SL2400), 90369 (UV1050) and 91220 (mCare 300)

• Hanger assembly with optional 6" (15.2 cm) down post
• Single hook attachment for cable management
• Gas module adapter plate

• 16"/40.6 cm M-Series Arm allows lateral positioning, tilt/swivel adjustments, and cable management.
• Pivot stop limits rear rotation
• Utility cable hooks
• 5"/12.7 cm slide in plate
• Channel covers for cable management

• 16"/40.6 cm M Series Arm allows lateral positioning, tilt/swivel adjustments, and cable management.
• Pivot stop limits rear rotation
• 75/100 mm VESA mounting adapter plate

• Heavy duty VHM allows mounting abilities for Spacelab gas module
• VHM Provides lateral positioning, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle.
• Features a parallel linkage for constant viewing angle throughout range of motion.
• Compatible with flat panels - VESA 100 or 75 mm mounting configurations.
• 19" (48.3 cm) Channel
• Channel cover for cable management
• Power supply holster

 Note: This kit may be used for mounting flat panels compliant with the VESA mounting standard.

• M-Series/VHM compatable hanger to hold module
• Dual Power supply wall mount crossmember
• Includes 6" (15.2 cm)  and 9" (22.9 cm) downposts
• Includes mounting adapter

• Attaches to M-Series Arm, Variable Height Mount, or Downpost
• Mounts Spacelabs double-wide and single-wide yoke module housings side-by-side.

• Single wide yoke module
• Hook for cable management

• 8”/20.3 cm M Series Pivot Arm provides lateral position adjustment and cable management
• Cable hook
• 5"/12.7 cm slide in plate

Adapter kit for mounting Spacelabs module housing on slide in mounting plate

• 12” (30.5 cm) M-Series Pivot Arm allows lateral positioning, tilt/swivel adjustments, and cable management features.
• 19" (48.3 cm) Channel
• Channel cover for cable management
• Power supply holster
• VESA adapter plate

Note: This kit may be used for mounting flat panels compliant with the VESA mounting standard.

• Aestiva vent arm mounting kit
• Top shelf plate with horizontal channel
• Brackets to mount (2) module housings to top shelf
• (2) power supply holsters to mount on top (shown) or to right side.

• Aespire vent arm mounting kit
• Aespire top shelf plate with horizontal channel
• Brackets to mount (2) module housings to top shelf
• Power supply holsters to mount behind vent display, or top shelf (shown), or to right side dovetail track.

• 16” (40.6 cm) M-Series Pivot Arm provides lateral position adjustment and cable management features.
• Power supply holster is included.

Wall Channel is sold separately

• 8”/20.3 cm M Series Pivot Arm provides lateral position adjustment and cable management
• Cable hook
• 5"/12.7 cm slide in plate

• Hanger assembly with optional 6" (15.2 cm) down post
• Single hook attachment for cable management
• Gas module adapter plate

Adapter kit for mounting Spacelabs module housing on slide in mounting plate

• Pivot Arm offers swivel/tilt adjustments and two (2) pivot points for lateral adjustability
• Features range of motion from flush to full extension, and cable management
• VESA® FDMI™ 75/100 mm compatible
• Tilt Mechanism Maximum Load: 30 lbs/13.6 kg
• Total Arm Maximum Load: 60 lbs/27.2 kg
• Product weight: 3 lbs/1.4 kg

NOTE: Channel sold separately

• 6" (15.24 cm) Fixed Extension provides additional clearance or reach.
• 5" (12.7 cm) channel accepts any GCX support arm.
• Mounts directly the Dräger Apollo Accessory Track.  Can be used with Primus.

• 8”/20.3 cm M Series Pivot Arm provides lateral position adjustment and cable management
• Cable hook
• 5"/12.7 cm slide in plate

Adapter kit for mounting Spacelabs module housing on slide in mounting plate

• M-Series/VHM compatable hanger to hold module
• Dual Power supply wall mount crossmember
• Includes 6" (15.2 cm)  and 9" (22.9 cm) downposts
• Includes mounting adapter

• 13" (33.02 cm) channel with Drager Julian or Apollo fittings.

• Universal holster to securely mount a variety of power supply units
• Max size: 4”/10.2 cm x 4”/10.2 cm or 16''/40.6 cm perimeter
• Min size: 1.4''/3.6 cm x 2.3''/5.8 cm or 7.4''/18.8 cm perimeter
• Can be vertically or horizontally oriented
• Includes 12"/30.5 cm and 18"/45.7 cm Velcro Straps and cleat for cable management
• Product weight: .5 lbs/.23 kg

• Universal holster to securely mount a variety of power supply units
• Max size: 4”/10.2 cm x 4”/10.2 cm or 16''/40.6 cm perimeter
• Min size: 1.4''/3.6 cm x 2.3''/5.8 cm or 7.4''/18.8 cm perimeter
• Can be vertically or horizontally oriented
• Includes 12"/30.5 cm and 18"/45.7 cm Velcro Straps and cleat for cable management
• Product weight: .5 lbs/.23 kg

Articulating Arm 15" (38.1 cm) x 15" (38.1 cm) for SpaceLabs 1030/1050.

Mounting Adapter For Spacelabs 91370 (SL2600), 91369 (SL2400), 90369 (UV1050) and 91220 (mCare 300)

Dräger N6000 20.25" (51.4 cm) Left Side Channel

N6000 12" (30.5 cm) Rear Channel - 15 lb (6.8 kg) limit

• Universal holster to securely mount a variety of power supply units
• Max size: 4”/10.2 cm x 4”/10.2 cm or 16''/40.6 cm perimeter
• Min size: 1.4''/3.6 cm x 2.3''/5.8 cm or 7.4''/18.8 cm perimeter
• Can be vertically or horizontally oriented
• Includes 12"/30.5 cm and 18"/45.7 cm Velcro Straps and cleat for cable management
• Product weight: .5 lbs/.23 kg

Mounting Adapter For Spacelabs 91370 (SL2600), 91369 (SL2400), 90369 (UV1050) and 91220 (mCare 300)

Dräger N6000 20.25" (51.4 cm) Left Side Channel

12" (30.5 cm) Pivot Arm for SpaceLabs 1030/1050 (without channel).

N6000 12" (30.5 cm) Rear Channel - 15 lb (6.8 kg) limit

• Kit allows up to (3) power supplies to be mounted side by side in a GCX channel.

Note:  Power supply holsters and straps are not included in this kit, but are present in flat panel and module housing mounting kits for the Spacelabs Ultraview SL2800.

• 16"/40.6 cm M Series Arm allows lateral positioning, tilt/swivel adjustments, and cable management.
• Pivot stop limits rear rotation
• 75/100 mm VESA mounting adapter plate

• 8”/20.3 cm M Series Pivot Arm provides lateral position adjustment and cable management
• Cable hook
• 5"/12.7 cm slide in plate

• Hanger assembly with optional 6" (15.2 cm) down post
• Single hook attachment for cable management
• Gas module adapter plate

Adapter kit for mounting Spacelabs module housing on slide in mounting plate

• Secures two (2) power supplies side by side.
• Each holster holds a power supply
• Max size: 4" (10.2 cm) x 4" (10.2 cm) - 16" (40.6 cm) total perimeter.
• Min size: 2.4" (6.1 cm) x 1.3" (3.3 cm) - 7.4" (18.8 cm) total perimeter.

• 30 lb/13.6 kg counterweight for a GCX Channel
• Weight is concealed by a painted (off-white) sheet metal cover for easy cleaning and aesthetic appearance

7"/17.8 cm Channel with Julian Fittings (not for 3 vaporizer model).

15" (38.1 cm) Pivot Arm SpaceLabs Flat Panel.

• M-Series/VHM compatable hanger to hold module
• Dual Power supply wall mount crossmember
• Includes 6" (15.2 cm)  and 9" (22.9 cm) downposts
• Includes mounting adapter

• Secures two (2) power supplies side by side.
• Each holster holds a power supply
• Max size: 4" (10.2 cm) x 4" (10.2 cm) - 16" (40.6 cm) total perimeter.
• Min size: 2.4" (6.1 cm) x 1.3" (3.3 cm) - 7.4" (18.8 cm) total perimeter.

• Most configurations require the Extended Base option from Dräger.
• For new units: Dräger P/N 8601798
• For retrofit: Dräger P/N 8601824

The configuration shown is provided for reference only and is not intended to indicate that it is an "approved" configuration.

15" (38.1 cm) Pivot Arm with Hanger for Ultraview 1700 Module Housing.

SpaceLabs Flat Panel (Digitron) Surface Mount for Horizontal Channel

7"/17.8 cm Channel with Julian Fittings (not for 3 vaporizer model).

Julian Top Shelf Base Plate with 10" (25.4 cm) Horizontal Channel

The configuration shown is provided for reference only and is not intended to indicate that it is an "approved" configuration.

Dual Power Supply Holster for Module Housing & Flat Panel Power Supplies.

• Most configurations require the Extended Base option from Dräger.
• For new units: Dräger P/N 8601798
• For retrofit: Dräger P/N 8601824

• 16"/40.6 cm M Series Arm allows lateral positioning, tilt/swivel adjustments, and cable management.
• Pivot stop limits rear rotation
• 75/100 mm VESA mounting adapter plate

• 8”/20.3 cm M Series Pivot Arm provides lateral position adjustment and cable management
• Cable hook
• 5"/12.7 cm slide in plate

Adapter kit for mounting Spacelabs module housing on slide in mounting plate

• M-Series/VHM compatable hanger to hold module
• Dual Power supply wall mount crossmember
• Includes 6" (15.2 cm)  and 9" (22.9 cm) downposts
• Includes mounting adapter

• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• VESA® FDMI™ 75/100 mm compatible
• Maximum Load: 30 lbs/13.6 kg

NOTE:
Channel sold separately

• GCX Channel adapts to single dovetail profile on Datex-Ohmeda anesthesia machines
• Allows use of GCX channel solutions

• Secures two (2) power supplies side by side.
• Each holster holds a power supply
• Max size: 4" (10.2 cm) x 4" (10.2 cm) - 16" (40.6 cm) total perimeter.
• Min size: 2.4" (6.1 cm) x 1.3" (3.3 cm) - 7.4" (18.8 cm) total perimeter.

• Mounts to top surface of Aespire or Avance.
• Includes horizontal channel.

Permits gas monitor to be mounted in a horizontal channel.

• Universal holster to securely mount a variety of power supply units.
• Max size: 4" (10.2 cm) x 4" (10.2 cm) - 16" (40.6 cm) total perimeter.
• Min size: 2.4" (6.1 cm) x 1.3" (3.3 cm) - 7.4" (18.8 cm) total perimeter.
• Can be vertically or horizontally oriented.
• Includes cable cleat for cord storage.

• Permits two 90364, 90387, 90491 (Double Wide Housings) or 90485 & 90499 (Single Wide Housings) to be mounted under an M or VHM series flat panel arm.
• Includes spacer posts to accommodate a variety of flat panel sizes.

Note: Additional hardware is required from SpaceLabs to attach the Double Wide Housings (Spacelabs Kit# 016-0429-00) & Single Wide Housings (Spacelabs Kit# 016-0342-00)

• Aestiva vent arm mounting kit
• Top shelf plate with horizontal channel
• Brackets to mount (3) module housings to top shelf
• Dual power supply mount for right side
• Counterweight kit for right side