• Provides monitor tilt adjustment
• 21"/53.3 cm diameter Base/Post/Casters with built in counterweight
• Handle
• Utility Basket with cable management hooks
• IDS power supply mount (For Gamma - use RS-0021-03 Power Supply Mount - Sold separately)
• Works with Dräger INFINITY GAMMA, GAMMA XL, DELTA, DELTA XL patient monitors
• Part numbers if ordered separately:
  - RS-0006-64 Roll Stand Kit
  - SI-0032-62 IDS Power Supply 2"/5.1 cm diameter Post Mount

• Camlock Tilt/Swivel mount
• MP 60/70 Mounting Adapter
• Top Shelf Base Plate with Camlock rails
• 12" (30.5 cm) M Series Pivot Arm with Down Post for Flexible Module Server (FMS)
• Counterweight kit

• Pivot arm offers tilt/swivel adjustments with two (2) pivot points for lateral adjustability
• Features range of motion from flush to full extension
• 5"/12.7 cm slide in, quick release adapter plate
• Features cable management cavity below the arm
• Tilt Mechanism for back mounted devices, Maximum Load: 30 lbs/13.6 kg
• Tilt Mechanism bottom mounted devices,  Maximum Load: 60 lbs/27.2 kg

NOTE:  Channel sold separately

4" (10.2 cm) channel for Cato accessory track

DASH Surface Mount (RAC Module can also be Surface Mounted)

SAM Module Mount

4" (10.2 cm) channel for Cato accessory track

• Pivot arm offers tilt/swivel adjustments with two (2) pivot points for lateral adjustability
• Features range of motion from flush to full extension
• 5"/12.7 cm slide in, quick release adapter plate
• Features cable management cavity below the arm
• Tilt Mechanism for back mounted devices, Maximum Load: 30 lbs/13.6 kg
• Tilt Mechanism bottom mounted devices,  Maximum Load: 60 lbs/27.2 kg

NOTE:  Channel sold separately

• 8"/20.3 cm M Series Pivot Arm offers a pivot point at the wall channel for lateral adjustability and swivel adjustment.
• Features range of motion from flush to full extension, and cable management.

• Permits the RAC4A to hang from an M-Series or VHM support arm.
• May be used with included down post or attached directly to the underside of the front end.
• Provides swivel adjustment.

• Universal holster to securely mount a variety of power supply units
• Max size: 4”/10.2 cm x 4”/10.2 cm or 16''/40.6 cm perimeter
• Min size: 1.4''/3.6 cm x 2.3''/5.8 cm or 7.4''/18.8 cm perimeter
• Can be vertically or horizontally oriented
• Includes 12"/30.5 cm and 18"/45.7 cm Velcro Straps and cleat for cable management
• Product weight: .5 lbs/.2 kg

4" (10.2 cm) channel for Cato accessory track

• Pivot arm offers tilt/swivel adjustments with two (2) pivot points for lateral adjustability
• Features range of motion from flush to full extension
• 5"/12.7 cm slide in, quick release adapter plate
• Features cable management cavity below the arm
• Tilt Mechanism for back mounted devices, Maximum Load: 30 lbs/13.6 kg
• Tilt Mechanism bottom mounted devices,  Maximum Load: 60 lbs/27.2 kg

NOTE:  Channel sold separately

Allows the Solar 8000M keypad to mount below a 75/100 mm VESA compatible flat panel display.

• Permits the RAC4A to hang from an M-Series or VHM support arm.
• May be used with included down post or attached directly to the underside of the front end.
• Provides swivel adjustment.

• 8"/20.3 cm M Series Pivot Arm offers a pivot point at the wall channel for lateral adjustability and swivel adjustment.
• Features range of motion from flush to full extension, and cable management.

• Universal holster to securely mount a variety of power supply units
• Max size: 4”/10.2 cm x 4”/10.2 cm or 16''/40.6 cm perimeter
• Min size: 1.4''/3.6 cm x 2.3''/5.8 cm or 7.4''/18.8 cm perimeter
• Can be vertically or horizontally oriented
• Includes 12"/30.5 cm and 18"/45.7 cm Velcro Straps and cleat for cable management
• Product weight: .5 lbs/.2 kg

4" (10.2 cm) channel for Cato accessory track

7"/17.8 cm Channel with Julian Fittings (not for 3 vaporizer model).

• Power supply holster can be oriented vertically or horizontally
• Includes Channel Slide for GCX channel mounting
• Includes Clamping blocks for mounting to a 2"/5.1 cm diameter post
  

Note:  Use DR-0039-02 for horizontal rail mounting.  The holster can also be installed on to the GCX PRC Post/Rail Clamp for posts up to 1.5"/38 mm in diameter and 10x25 mm horizontal rails.

• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• VESA® FDMI™ 75/100 mm compatible
• Maximum Load: 30 lbs/13.6 kg

NOTE:
Channel sold separately

• 12" (30.5 cm) fluted down post

• Allows flush mounting to GCX channels

• Clamps to posts between .75"/19 mm to 1.5"/38 mm in diameter and
  10 x 25 mm horizontal rails.
• Compatible with flat panels that offer VESA 75 or 100 mm mounting hole configurations.
• Offers tilt and swivel adjustment.
• 25 lbs/11.3 kg weight limit

7"/17.8 cm Channel with Julian Fittings (not for 3 vaporizer model).

• Pivot Arm offers swivel/tilt adjustments and two (2) pivot points for lateral adjustability
• Features range of motion from flush to full extension, and cable management
• VESA® FDMI™ 75/100 mm compatible
• Tilt Mechanism Maximum Load: 30 lbs/13.6 kg 
• Total Arm Maximum Load: 60 lbs/27.2 kg
• Product weight: 3.5 lbs/1.6 kg

NOTE:
Channel sold separately

• Clamps to posts between .75"/19 mm to 1.5"/38 mm in diameter and
  10 x 25 mm horizontal rails.
• Compatible with flat panels that offer VESA 75 or 100 mm mounting hole configurations.
• Offers tilt and swivel adjustment.
• 25 lbs/11.3 kg weight limit

• 12" (30.5 cm) fluted down post

• Power supply holster can be oriented vertically or horizontally
• Includes Channel Slide for GCX channel mounting
• Includes Clamping blocks for mounting to a 2"/5.1 cm diameter post
  

Note:  Use DR-0039-02 for horizontal rail mounting.  The holster can also be installed on to the GCX PRC Post/Rail Clamp for posts up to 1.5"/38 mm in diameter and 10x25 mm horizontal rails.

• Allows flush mounting to GCX channels

7"/17.8 cm Channel with Julian Fittings (not for 3 vaporizer model).

• Articulating Arm offers swivel/tilt adjustments and three (3) pivot points for lateral adjustability
• Features range of motion from flush to full extension, and cable management
• VESA® FDMI™ 75/100 mm compatible
• Tilt Mechanism Maximum Load: 30 lbs/13.6 kg
• Product weight: 4 lbs/1.8 kg

NOTE:
Channel sold separately

• Clamps to posts between .75"/19 mm to 1.5"/38 mm in diameter and
  10 x 25 mm horizontal rails.
• Compatible with flat panels that offer VESA 75 or 100 mm mounting hole configurations.
• Offers tilt and swivel adjustment.
• 25 lbs/11.3 kg weight limit

• 12" (30.5 cm) fluted down post

• Power supply holster can be oriented vertically or horizontally
• Includes Channel Slide for GCX channel mounting
• Includes Clamping blocks for mounting to a 2"/5.1 cm diameter post
  

Note:  Use DR-0039-02 for horizontal rail mounting.  The holster can also be installed on to the GCX PRC Post/Rail Clamp for posts up to 1.5"/38 mm in diameter and 10x25 mm horizontal rails.

• Allows flush mounting to GCX channels

Top shelf base plate with 21" (53.3 cm) horizontal channel.

• 12"/30.5 cm dual channel columns allow standard GCX wall mounting solutions to be used in areas where wall mounting is not practical and a horizontal channel can be mounted.
• Features two (2) channel profiles to mount arms and accessories plus two (2) side raceways with covers for cable management

• Fixed low profile G5 mount
• Requires Philips G5 mounting adapter

• Provides Swivel (+/- 20 degrees or 360 degrees) adjustment
• Ideal for applications with limited space
• Product weight: 1 lbs/.5 kg

Note:  Channel sold separately

• The bracket attaches to a support arm (M-Series, or VHM Variable Height Arm) or roll stand allowing two (2) flat panel displays to be mounted side-by-side.
• Horizontal spread adjustment accommodates displays with enclosures up to 21"/53.3 cm in width.
• Provides swivel at connection point to arm (not a roll stand) and independent tilt/swivel adjustments for each display screen.
• Product weight: 5.5 lbs/2.5 kg

• Bracket allows left or right side mounting
• Quick release for Remote Speedpoint

• Allows for mounting to 15"/38.1cm or 17"/43.2cm VESA standard flat panel displays

• 8" (20.3 cm) x 8" (20.3 cm) M Series Articulating Arm with Down Post for mounting the Flexible Module Server (FMS)

• Flush mount pan with integrated spill shield.
• CPU may be vertically (front panel up/down) or horizontally oriented (front panel left/right) - picture shows vertical orientation, front panel up.
• Durable powder coat paint finish.
• For rails 8-10 mm x 25-30 mm also use GCX P/N: 10M-0002-02 6" (15.2 cm) Rail Channel w/Wall Stop.
• Contact GCX for dual rail system solutions.

• 20.8"/52.8 cm wide tray for standard keyboard with left/right
  8"/20.3 cm x 6.5"/16.5 cm slide out mouse trays
• Padded wrist rest
• Includes mouse house, mouse pads
• Product weight: 5.5 lbs/2.5 kg

• Folding ergo-bracket allows the keyboard tray/plate to be folded upward for security or to save space
• Provides ergonomic separation of display and keyboard with independent display tilt adjustment
• Accepts all GCX keyboard trays/plates
• VESA® FDMI™ 75/100 mm compatible
• Product weight: 9.2 lbs/4.2 kg

• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel adjustments for optimal viewing angle
• Dual pivoting extension is ideal for obtaining additional reach or clearance for access
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• Optimal weight range: 22 - 40 lbs/10 - 18.1 kg
• Maximum Load: 40 lbs/18.1 kg

NOTE:
Channel sold separately

• Power supply holster can be oriented vertically or horizontally
• Includes Channel Slide for GCX channel mounting
• Includes Clamping blocks for mounting to a 2"/5.1 cm diameter post
  

Note:  Use DR-0039-02 for horizontal rail mounting.  The holster can also be installed on to the GCX PRC Post/Rail Clamp for posts up to 1.5"/38 mm in diameter and 10x25 mm horizontal rails.

Primus top plate with camlock rails

• Allows flat panel to be mounted directly above the MP90 CPU when the CPU is secured to CamLock rails.
• Will hold a 75/100mm VESA compatible flat panel up to 18" (45.7 cm) - post height is 9" (22.9 cm).
• Does not include optional power supply mount for the post, RS-0021-03, or remote alarm box and speedpoint mounting kit, AG-0019-80.

• Bracket allows left or right side mounting
• Quick release for Remote Speedpoint

• Allows for mounting to 15"/38.1cm or 17"/43.2cm VESA standard flat panel displays

• 8"/20.3 cm x 8"/20.3 cm articulating arm with 6"/15.2 cm down post for mounting the Flexible Module Server FMS.

• Pivot Arm offers swivel/tilt adjustments and two (2) pivot points for lateral adjustability
• Features range of motion from flush to full extension, and cable management
• VESA® FDMI™ 75/100 mm compatible
• Tilt Mechanism Maximum Load: 30 lbs/13.6 kg 
• Total Arm Maximum Load: 60 lbs/27.2 kg
• Product weight: 3.5 lbs/1.6 kg

NOTE:
Channel sold separately

• Flush mount pan with integrated spill shield.
• CPU may be vertically (front panel up/down) or horizontally oriented (front panel left/right) - picture shows vertical orientation, front panel up.
• Durable powder coat paint finish.
• For rails 8-10 mm x 25-30 mm also use GCX P/N: 10M-0002-02 6" (15.2 cm) Rail Channel w/Wall Stop.
• Contact GCX for dual rail system solutions.

• Bracket allows left or right side mounting
• Quick release for Remote Speedpoint

• Allows for mounting to 15"/38.1cm or 17"/43.2cm VESA standard flat panel displays

• 12" (30.5 cm) fluted down post

• Mounts to top surface of Drager Tiro
• 10" (25.4 cm) horizontal channel

• Fixed low profile G5 mount
• Requires Philips G5 mounting adapter

• Fixed low profile AGM mount

• Allows flat panel to be mounted directly above the MP90 CPU when the CPU is secured to CamLock rails.
• Will hold a 75/100mm VESA compatible flat panel up to 18" (45.7 cm) - post height is 9" (22.9 cm).
• Does not include optional power supply mount for the post, RS-0021-03, or remote alarm box and speedpoint mounting kit, AG-0019-80.

• Bracket allows left or right side mounting
• Quick release for Remote Speedpoint

• Allows for mounting to 15"/38.1cm or 17"/43.2cm VESA standard flat panel displays

• 8"/20.3 cm x 8"/20.3 cm articulating arm with 6"/15.2 cm down post for mounting the Flexible Module Server FMS.

• Julian Top Shelf
• Camlock Rails

• VHM™ Variable height support arm with Down Post for Flexible Module Server (FMS).
• Allows vertical and lateral positioning
• Provides tilt/swivel adjustments.
• Includes: Bracket for Remote Speedpoint and External Alert Device (allows left or right side mounting), 75/100 mm VESA Flat Panel Mounting Adapter, and Channel Cover.
• Works with 15" (38.1 cm) (shown) and 17" (43.2 cm) Flat Panels - click on picture to see 17".
• Bracket for FP display power supply supplied by Philips - If display is not acquired from Philips, use power supply mount, GCX P/N WM-0024-03

Top Shelf Base Plate with Philips Cam Lock Rails for Narkomed 6000/6400

Camlock compatible mounting plate*

* Plate requires quick release Table Top mounting hardware included with EGM.

Dräger N6000 20.25" (51.4 cm) Left Side Channel

• May be used with wall mounts to provide additional extension for clearance or reach.
• 5.5" (14 cm) channel accepts any GCX wall mount support arm.

• 6" (15.24 cm) Fixed Extension provides additional clearance or reach.
• 5" (12.7 cm) channel accepts any GCX support arm.
• Mounts directly the Dräger Apollo Accessory Track.  Can be used with Primus.

• Adapts a standard 7"/17.8 cm GCX mounting channel to 38 mm posts.
• Allows installation of all GCX wall mount solutions including support arms and accessories
• Refer to part number PM-0005-03 if the diameter of the post is not 38 mm, but is between 19-48 mm in diameter
• Refer to post system specifications for maximum weight limitations

• 16" (40.6 cm) M Series Pivot Arm with Down Post for 1 or 2 Flexible Module Servers (FMS)
• Bracket for Remote Speedpoint and External Alert Device (allows left or right side mounting)
• Top Shelf Base Plate with Camlock rails
• 20" (50.8 cm) Channel 
• Kit works with 15" (38.1 cm) or 17" (43.2 cm) flat panel displays.

• 16" (40.6 cm) M Series Pivot Arm (for Fabius GS) with Down Post for 1 or 2 Flexible Module Servers (FMS)
• Bracket for Remote Speedpoint and External Alert Device (allows left or right side mounting)
• Top Shelf Base Plate with Camlock rails
• Fabius GS Rear Compartment Mount for MP90 CPU
• Flush Mount for MP90 CPU.
• Kit works with 15" (38.1 cm) or 17" (43.2 cm) flat panel displays.

• Allows G5 to be mounted directly above the MP90 CPU
• Requires Philips table top mount for the G5
• Plate with Camlock rails not included

Camlock compatible mounting plate*

* Plate requires quick release Table Top mounting hardware included with EGM.

• 16"/40.6 cm M Series Pivot Arm for Julian/Primus accessory track
• 6"/15.2 cm down post for FMS

• 6"/15.2 cm mounting channel for rails 10 mm(w) x 25-40 mm(h)
• Allows installation of all GCX wall mount solutions including support arms and accessories
• The Stop stabilizes the channel. Two Stops are included to accommodate wall spacing: 10-40mm and 10-160mm
• Refer to rail system specifications for maximum weight limitations

• Variable height VHM arm 
• 6" (15.2 cm) rear extension and 6" (15.2 cm) riser
• Rear extension includes stop blocks to prevent arm from hitting third vaporizer
• 6" (15.2 cm) down post for flexible module server (FMS)
• MP90 VESA plate and mounting adapter compatible with Philips supplied monitor
• MP90 remote speedpoint and alert bracket
• Top shelf base plate with camlock rails to secure MP90 CPU

• Most configurations require the Extended Base option from Dräger.
• For new units: Dräger P/N 8601798
• For retrofit: Dräger P/N 8601824

• 12" (30.5 cm) M Series Pivot Arm
• 12" (30.5 cm) M Series Pivot Arm with Down Post for Flexible Module Server (FMS)
• MP60-70 Mounting Adapter
• 13" (33 cm) Channel for Julian accessory track
• Channel Cover

• VHM™ provides 17"/43.2 cm vertical adjustment range, lateral positioning and monitor tilt/swivel adjustments
• Locking system to prevent upward movement when the monitor is removed from the IDS base
• Includes: Handle, Channel Cover, and IDS power supply mount (For Gamma order power supply mount WM-0024-03)
  
  Works with Dräger INFINITY GAMMA, GAMMA XL, DELTA, DELTA XL patient monitors

Channel sold separately

• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• VESA® FDMI™ 75/100 mm compatible
• Maximum Load: 30 lbs/13.6 kg

NOTE:
Channel sold separately

• Power supply holster can be oriented vertically or horizontally
• Includes Channel Slide for GCX channel mounting
• Includes Clamping blocks for mounting to a 2"/5.1 cm diameter post
  

Note:  Use DR-0039-02 for horizontal rail mounting.  The holster can also be installed on to the GCX PRC Post/Rail Clamp for posts up to 1.5"/38 mm in diameter and 10x25 mm horizontal rails.

• Works with GCX flat panel mounts to allow easy position adjustments for the display without having to grab the display enclosure
• Adjustable width to accommodate flat panel displays from 11.5"/29.2 cm - 18.5"/47 cm
• Vertical, lateral and tilt adjustments are facilitated by the padded grips located to the left and right sides
• Padded grip handles can be installed facing up or down
• Mounts between display and GCX mounting plate
• Product weight: 3 lbs/1.4 kg

• 12"/30.5cm M-Series arm with 6"/15.2cm down post for flexible module server (FMS)
• Top plate with 10.5"/26.7cm channel for mounting G5 
• G5 top shelf horizontal channel mount
• Requires Philips table top mount for the MP 60/70

• Pedestal mount for tabletop/desktop use
• Column height: 12"/30.5 cm
• Allows rotation 90 degree (left or right) for landscape or page mode display orientation
• Provides swivel (+/- 20 degrees) and tilt adjustments for optimal viewing angle
• VESA® FDMI™ 75/100 mm compatible
• Fits 27"/68.6 cm or smaller LCD (Measured Diagonally)
• Maximum Load: 30 lbs/13.6 kg

• Power supply holster can be oriented vertically or horizontally
• Includes Channel Slide for GCX channel mounting
• Includes Clamping blocks for mounting to a 2"/5.1 cm diameter post
  

Note:  Use DR-0039-02 for horizontal rail mounting.  The holster can also be installed on to the GCX PRC Post/Rail Clamp for posts up to 1.5"/38 mm in diameter and 10x25 mm horizontal rails.

• Dräger Primus top plate
• 15"/38.1 cm horizontal channel

• Counter top or horizontal channel low profile mount for MP 60/70 monitor.
• Includes tilt and swivel adjustments.

• 8"/20.3 cm x 8"/20.3 cm articulating arm with 6"/15.2 cm down post for mounting the Flexible Module Server FMS.

• VHM™ provides 17"/43.2 cm vertical adjustment range, lateral positioning and monitor tilt/swivel adjustments
• Provides drop post to lower the monitor (when channel is installed too high) to allow easy access for Pick and Go®
• Locking system to prevent upward movement when the monitor is removed from the IDS base
• Includes:  Channel Cover, and IDS power supply mount (For Gamma order power supply mount WM-0024-03)
  
  Works with Dräger INFINITY GAMMA, GAMMA XL, DELTA, DELTA XL patient monitors
  

Channel sold separately

• 12"/30.5 cm M-Series arm for Philips G5
• Tiro top shelf plate 
• Stack Mount for MP20/30/40/50. Includes tilt/swivel for monitor.

• 8" (20.3 cm) x 8" (20.3 cm) M Series Articulating Arm with Down Post for mounting the Flexible Module Server (FMS)
• Top shelf baseplate with 21" (53.3 cm) horizontal channel
• Counter top mount with 9"/22.8cm post with VESA plate for mounting MP 90
• Bracket for Remote Speedpoint and External Alert Device (allows left or right side mounting)
• G5 mounting adapter

• Flush channel mount for MP 90 CPU

• Fixed low profile AGM mount

• Allows mounting to an AGM or Camlock rails provided by GCX as part of an anesthesia machine mounting configuration
• Includes Camlock plate and low profile post to hold the MP 60/70
• Compatible with the quick release Table Top mounting hardware included with IntelliVue.

Rails/plate not included

• Julian Top Shelf
• Camlock Rails

• 8"/20.3 cm x 8"/20.3 cm articulating arm with 6"/15.2 cm down post for mounting the Flexible Module Server FMS.

• 6" (15.2 cm) Extension and 12" (30.5 cm) M Series Pivot Arm with Down Post for mounting the Flexible Module Server (FMS)
• Top Plate with 15" (38.1 cm) Channel
• Horizontal channel mount for MP 90 monitor
• Bracket for Remote Speedpoint and External Alert Device (allows left or right side mounting)

• Lower Right Side Channel Extension and MP90 CPU mount

• Dräger Oxylog 3000 Transportation Ventilator Pole Mount.
• Fits pole diameters from .75" (1.9 cm) to 2" (5.1 cm).

• 12" (30.5 cm) M Series Pivot Arm
• 12" (30.5 cm) M Series Pivot Arm with Down Post for Flexible Module Server (FMS)
• 20" (51.4 cm) Channel
• Channel Cover

15.25"/38.7 cm left side Drager N6400 channel.

• 16"/40.6 cm GCX channel spans between two horizontal rails 10 mm(w) x 25-30 mm(h)
• Allows installation of all GCX wall mount solutions including support arms and accessories
• Rail spacing: 25 or 35 cm
• Maximum load: 60 lbs/27.2 kg
• Refer to rail system specifications for maximum weight limitations

• 16"/40.6 cm M Series Pivot Arm for Julian/Primus accessory track.
• Includes 6"/15.2 cm down post for FMS.

• VHM™ Suspension Arm (LOCKING) With 8"/20.3 cm Rear Extension  provides 17"/43.2 cm vertical adjustment range, lateral positioning and monitor tilt/swivel adjustments
• Provides drop post to lower the monitor (when channel is installed too high) to allow easy access for Pick and Go®
• Locking system to prevent upward movement when the monitor is removed from the IDS base
• Includes:  Channel Cover, and IDS power supply mount (For Gamma order power supply mount WM-0024-03)
  
  Works with Dräger INFINITY GAMMA, GAMMA XL, DELTA, DELTA XL patient monitors
  

Additional Solutions:

• SI-0021-11  VHM Suspension Arm (LOCKING) With 12"/30.5 cm Rear Extension
• SI-0021-86  VHM Suspension Arm (LOCKING) With 16"/40.6 cm Rear Extension

 Channel Sold Separately

• Variable height VHM arm 
• 8" (20.3 cm) rear extension provides clearance from the vaporizer.
• 6" (15.2 cm) down post for flexible module server (FMS).

• Most configurations require the Extended Base option from Dräger.
• For new units: Dräger P/N 8601798
• For retrofit: Dräger P/N 8601824

• 16"/40.6 cm M Series Pivot Arm for Julian/Primus accessory track.
• Includes 6"/15.2 cm down post for FMS.

• 12" (30.5 cm) M Series Pivot Arm
• Mounting Adapter
• 20.25" (51.4 cm) Channel
• Channel Cover

15.25"/38.7 cm left side Drager N6400 channel.

• 16" (40.6 cm) M Series Pivot Arm with Down Post for Flexible Module Server (FMS)
• MP60/70 Mounting Adapter
• Top Shelf Base Plate with Camlock rails
• Counterweight kit 

Camlock compatible mounting plate.  Allows G5 to be mounted on top of machine. 

• Top shelf base plate with 10"/25.4 cm channel
• G5 Horizontal Channel Low Profile Mount. Requires Philips A10 Table Top Mount for G5 and for IntelliVue Monitor.

• Power supply holster can be oriented vertically or horizontally
• Includes Channel Slide for GCX channel mounting
• Includes Clamping blocks for mounting to a 2"/5.1 cm diameter post
  

Note:  Use DR-0039-02 for horizontal rail mounting.  The holster can also be installed on to the GCX PRC Post/Rail Clamp for posts up to 1.5"/38 mm in diameter and 10x25 mm horizontal rails.

• VHM™ provides 17"/43.2 cm vertical adjustment range, lateral positioning and monitor tilt/swivel adjustments
• Locking system to prevent upward movement when the monitor is removed from the IDS base
• Includes: Handle, IDS power supply mount & Rail Channel (not shown)(For Gamma/GammaXL, order power supply mount WM-0024-03)
  
  Works with Dräger INFINITY GAMMA, GAMMA XL, DELTA, DELTA XL patient monitors
  
• Parts needed:
  - SI-0021-12 VHM Arm Kit
  - 10m-0002-12 6"/15.2 cm Channel for Horizontal Rails 10 mm (w) x 25-40 mm (h), or 10M-0002-02 6"/15.2 cm Channel for Horizontal Rails 10 mm (w) x 25-30 mm (h) (Need 2 - 1 for arm and 1 for IDS power supply) 

• 16" (40.6 cm) M Series Pivot Arm
• Mounting Adapter
• Top Shelf Base Plate with Camlock rails
• Counterweight kit

Camlock compatible mounting plate.  Allows G5 to be mounted on top of machine. 

• 16"/40.6 cm M Series Arm allows lateral positioning, tilt/swivel adjustments, and cable management.
• Pivot stop limits rear rotation
• 75/100 mm VESA mounting adapter plate

• 8”/20.3 cm M Series Pivot Arm provides lateral position adjustment and cable management
• Cable hook
• 5"/12.7 cm slide in plate

Adapter kit for mounting Spacelabs module housing on slide in mounting plate

• M-Series/VHM compatable hanger to hold module
• Dual Power supply wall mount crossmember
• Includes 6" (15.2 cm)  and 9" (22.9 cm) downposts
• Includes mounting adapter

• 12"/30.5 cm M-Series arm for Philips G5
• Tiro top shelf plate 
• Stack Mount for MP20/30/40/50. Includes tilt/swivel for monitor.

• Counter top or horizontal channel low profile mount for MP 40/50 monitor.
• Includes tilt and swivel adjustments.

• Dräger Primus top plate
• 15"/38.1 cm horizontal channel

• Pedestal mount for desktop use
• Column height: 12"/30.5 cm
• Other countertop mounting solutions are available - refer to FLAT PANEL DISPLAY MOUNTS on PRODUCTS page
• Also equal to GCX part number FLP-0008-02

• Allows mounting to an AGM or Camlock rails provided by GCX as part of an anesthesia machine mounting configuration.
• Includes Camlock plate and low profile post to hold the MP 20/30.
• Compatible with the quick release Table Top mounting hardware included with IntelliVue.

Rails/plate not included.

• Julian Top Shelf
• Camlock Rails

• 25"/64 cm GCX channel spans between two horizontal rails 10 mm(w) x 25-30 mm(h)
• Lower Clamp span range (distance from upper clamp) = 9.5" to 23" / 24 cm to 58 cm
• Allows installation of all GCX wall mount solutions including support arms and accessories
• Maximum load: 60 lbs/27.2 kg
• Refer to rail system specifications for maximum weight limitations

• Top Plate with 15" (38.1 cm) Channel
• Counter top or horizontal channel low profile mount for MP 60/70 monitor

• 6" (15.2 cm) Extension and 12" (30.5 cm) M Series Pivot Arm with Down Post for mounting the Flexible Module Server (FMS)

• Top Plate with 15" (38.1 cm) Channel
• Counter top or horizontal channel low profile mount for MP 40/50 monitor

• VHM variable height arm
• 19"/48.5 cm Seismic Wall Channel
• MDS3 Power Supply Mount
• Compact "L" Keyboard Bracket to conveniently place the keyboard just beneath the display

• Counter top or horizontal channel low profile mount for MP 20/30 monitor.
• Includes tilt and swivel adjustments.

• Dräger Primus top plate
• 15"/38.1 cm horizontal channel

• 12"/30.5 cm M series Pivot Arm - Allows lateral positioning and monitor tilt/swivel adjustments
• Channel Cover
• Cable Hook
• IDS power supply mount (For Gamma order power supply mount WM-0024-03)
• Works with Dräger INFINITY GAMMA, GAMMA XL, DELTA, DELTA XL patient monitors
• Part numbers if ordered separately:
  - WMM-0002-02 12"/30.5 cm M series Pivot Arm
  - WMM-0006-04 Cable Hook
  - SI-0032-10 IDS power supply mount

Channel sold separately

• Universal holster to securely mount a variety of power supply units
• Max size: 4”/10.2 cm x 4”/10.2 cm or 16''/40.6 cm perimeter
• Min size: 1.4''/3.6 cm x 2.3''/5.8 cm or 7.4''/18.8 cm perimeter
• Can be vertically or horizontally oriented
• Includes 12"/30.5 cm and 18"/45.7 cm Velcro Straps and cleat for cable management
• Product weight: .5 lbs/.23 kg

Articulating Arm 15" (38.1 cm) x 15" (38.1 cm) for SpaceLabs 1030/1050.

Mounting Adapter For Spacelabs 91370 (SL2600), 91369 (SL2400), 90369 (UV1050) and 91220 (mCare 300)

Dräger N6000 20.25" (51.4 cm) Left Side Channel

N6000 12" (30.5 cm) Rear Channel - 15 lb (6.8 kg) limit

• Top shelf baseplate with 21" (53.3 cm) horizontal channel
• Horizontal channel low profile mount for Philips Intellivue MP60/70 or 40/50 or 20/30
• G5 top shelf horizontal channel mount

• Fixed low profile AGM mount

• Top shelf base plate with 10"/25.4 cm channel
• G5 Horizontal Channel Low Profile Mount. Requires Philips A10 Table Top Mount for G5 and for IntelliVue Monitor.

• Universal holster to securely mount a variety of power supply units
• Max size: 4”/10.2 cm x 4”/10.2 cm or 16''/40.6 cm perimeter
• Min size: 1.4''/3.6 cm x 2.3''/5.8 cm or 7.4''/18.8 cm perimeter
• Can be vertically or horizontally oriented
• Includes 12"/30.5 cm and 18"/45.7 cm Velcro Straps and cleat for cable management
• Product weight: .5 lbs/.23 kg

Mounting Adapter For Spacelabs 91370 (SL2600), 91369 (SL2400), 90369 (UV1050) and 91220 (mCare 300)

Dräger N6000 20.25" (51.4 cm) Left Side Channel

12" (30.5 cm) Pivot Arm for SpaceLabs 1030/1050 (without channel).

N6000 12" (30.5 cm) Rear Channel - 15 lb (6.8 kg) limit

7"/17.8 cm Channel with Julian Fittings (not for 3 vaporizer model).

15" (38.1 cm) Pivot Arm SpaceLabs Flat Panel.

• M-Series/VHM compatable hanger to hold module
• Dual Power supply wall mount crossmember
• Includes 6" (15.2 cm)  and 9" (22.9 cm) downposts
• Includes mounting adapter

• Secures two (2) power supplies side by side.
• Each holster holds a power supply
• Max size: 4" (10.2 cm) x 4" (10.2 cm) - 16" (40.6 cm) total perimeter.
• Min size: 2.4" (6.1 cm) x 1.3" (3.3 cm) - 7.4" (18.8 cm) total perimeter.

• Most configurations require the Extended Base option from Dräger.
• For new units: Dräger P/N 8601798
• For retrofit: Dräger P/N 8601824

The configuration shown is provided for reference only and is not intended to indicate that it is an "approved" configuration.

• 12"/30.5 cm M-series Pivot Arm for horizontal rails 10 x 25-40 mm - Allows lateral positioning and monitor tilt/swivel adjustments
• Cable Hook
• IDS power supply mount & Rail Channel (not shown). For Gamma power supply, use WM-0024-06 Power Supply Mount for 10 x 25-30mm horizontal rails
• Part numbers required:
  - WMM-0002-08 12"/30.5 cm M-series Pivot Arm  or WMM-0002-09 8"/20.3 cm M-series Pivot Arm
  - WMM-0006-04 Cable Hook
  - SI-0032-10 IDS power supply mount
  - 10M-0002-12 6"/15.2 cm Channel for Horizontal Rails 10 mm (w) x 25-40 mm (h), or 10M-0002-02 6"/15.2 cm Channel for Horizontal Rails 10 mm (w) x 25-30 mm (h) (for SI-0032-10 power supply mount)

Works with Dräger INFINITY GAMMA, GAMMA XL, DELTA, DELTA XL patient monitors

• 16"/40.6 cm M Series Arm allows lateral positioning, tilt/swivel adjustments, and cable management.
• Pivot stop limits rear rotation
• 75/100 mm VESA mounting adapter plate

• 8”/20.3 cm M Series Pivot Arm provides lateral position adjustment and cable management
• Cable hook
• 5"/12.7 cm slide in plate

• Hanger assembly with optional 6" (15.2 cm) down post
• Single hook attachment for cable management
• Gas module adapter plate

Adapter kit for mounting Spacelabs module housing on slide in mounting plate

• Secures two (2) power supplies side by side.
• Each holster holds a power supply
• Max size: 4" (10.2 cm) x 4" (10.2 cm) - 16" (40.6 cm) total perimeter.
• Min size: 2.4" (6.1 cm) x 1.3" (3.3 cm) - 7.4" (18.8 cm) total perimeter.

• 30 lb/13.6 kg counterweight for a GCX Channel
• Weight is concealed by a painted (off-white) sheet metal cover for easy cleaning and aesthetic appearance

• Wall Mount Kit For Dräger MDS 2 / Explorer System
• 37"/94 cm Wall Channel
• M-Series Flush Mount for Flat Panel PC
• VHM Height Adjustable Arm for Keyboard
• Parts needed, if ordered separately:
  - WS-0004-17 VHM Variable Height Arm for Keyboard Applications
  - WM-0023-51 Ergo Keyboard Tray 25.75"/65cm with Wrist Rest - Includes: Mouse Pad & Mouse House
  - WC-0002-10 or WC-0002-11 37"/94 cm Wall Channel
  - FLP-0009-04 M-Series Flush Mount with Tilt & Swivel Adjustments

• Top Plate with 15" (38.1 cm) Channel
• Horizontal channel low profile mount for MP 20/30 monitor

• Pivot Arm offers swivel/tilt adjustments and two (2) pivot points for lateral adjustability
• Features range of motion from flush to full extension, and cable management
• VESA® FDMI™ 75/100 mm compatible
• Tilt Mechanism Maximum Load: 30 lbs/13.6 kg
• Total Arm Maximum Load: 60 lbs/27.2 kg
• Product weight: 3 lbs/1.4 kg

NOTE: Channel sold separately

• 6" (15.24 cm) Fixed Extension provides additional clearance or reach.
• 5" (12.7 cm) channel accepts any GCX support arm.
• Mounts directly the Dräger Apollo Accessory Track.  Can be used with Primus.

• 8”/20.3 cm M Series Pivot Arm provides lateral position adjustment and cable management
• Cable hook
• 5"/12.7 cm slide in plate

Adapter kit for mounting Spacelabs module housing on slide in mounting plate

• M-Series/VHM compatable hanger to hold module
• Dual Power supply wall mount crossmember
• Includes 6" (15.2 cm)  and 9" (22.9 cm) downposts
• Includes mounting adapter

• 13" (33.02 cm) channel with Drager Julian or Apollo fittings.

15" (38.1 cm) Pivot Arm with Hanger for Ultraview 1700 Module Housing.

SpaceLabs Flat Panel (Digitron) Surface Mount for Horizontal Channel

7"/17.8 cm Channel with Julian Fittings (not for 3 vaporizer model).

Dual Power Supply Holster for Module Housing & Flat Panel Power Supplies.

Julian Top Shelf Base Plate with 10" (25.4 cm) Horizontal Channel

The configuration shown is provided for reference only and is not intended to indicate that it is an "approved" configuration.

• Most configurations require the Extended Base option from Dräger.
• For new units: Dräger P/N 8601798
• For retrofit: Dräger P/N 8601824

• 16" (40.6 cm) M-series Pivot Arm with 6" (15.2 cm) riser for Flat Panel
• Extension/IV Pole/Circuit Arm Assembly
• 8" (20.3 cm) Arm for PRN50 Recorder
• 4" (10.2 cm) Offset Channel for RAC Mounting Arm
• 12" (30.5 cm) M-series Pivot Arm for RAC
• Adapter plate for single RAC4
• Adapter plate for dual RAC4's
• Flat panel power supply mount
• Counterweight
• Chanel Mounting Kit for PRN 50 Recorder
• Solar 8000 Base Unit and Remote Keypad Mounting Assemblies sold separately

• Allows flush mounting to GCX channels

7"/17.8 cm Channel with Julian Fittings (not for 3 vaporizer model).

• Universal holster to securely mount a variety of power supply units
• Max size: 4”/10.2 cm x 4”/10.2 cm or 16''/40.6 cm perimeter
• Min size: 1.4''/3.6 cm x 2.3''/5.8 cm or 7.4''/18.8 cm perimeter
• Can be vertically or horizontally oriented
• Includes 12"/30.5 cm and 18"/45.7 cm Velcro Straps and cleat for cable management
• Product weight: .5 lbs/.23 kg

Articulating Arm 15" (38.1 cm) x 15" (38.1 cm) for SpaceLabs 1030/1050.

Mounting Adapter For Spacelabs 91370 (SL2600), 91369 (SL2400), 90369 (UV1050) and 91220 (mCare 300)

The configuration shown is provided for reference only and is not intended to indicate that it is an "approved" configuration.

• Most configurations require the Extended Base option from Dräger.
• For new units: Dräger P/N 8601798
• For retrofit: Dräger P/N 8601824

• Universal holster to securely mount a variety of power supply units
• Max size: 4” x 4”/10.2 cm x 10.2 cm or 16''/40.6 cm perimeter
• Min size: 1.4'' x 2.3''/3.6 cm x 5.8 cm or 7.4''/18.8 cm perimeter
• Can be vertically or horizontally oriented
• Includes 12"/30.5 cm and 18"/45.7 cm Velcro straps and cleat for cable management

• 16" (40.6 cm) M-series Pivot Arm with 6" (15.2 cm) riser for Flat Panel
• Extension/IV Pole/Circuit Arm Assembly
• 8" (20.3 cm) Arm for PRN50 Recorder
• 4" (10.2 cm) Offset Channel for RAC Mounting Arm
• 12" (30.5 cm) M-series Pivot Arm for RAC
• Adapter plate for single RAC4
• Adapter plate for dual RAC4's
• Flat panel power supply mount
• Counterweight
• Chanel Mounting Kit for PRN 50 Recorder
• Solar 8000 Base Unit and Remote Keypad Mounting Assemblies sold separately

Top shelf base plate with 21" (53.3 cm) horizontal channel.

• Features a 9" (22.9 cm) post and tilt/swivel adjustments.
• For use with horizontal channels.

• 16" (40.6 cm) M-series Pivot Arm with 6" (15.2 cm) riser for Flat Panel
• Extension/IV Pole/Circuit Arm Assembly
• 8" (20.3 cm) Arm for PRN50 Recorder
• 4" (10.2 cm) Offset Channel for RAC Mounting Arm
• 12" (30.5 cm) M-series Pivot Arm for RAC
• Adapter plate for single RAC4
• Adapter plate for dual RAC4's
• Flat panel power supply mount
• Counterweight
• Chanel Mounting Kit for PRN 50 Recorder
• Solar 8000 Base Unit and Remote Keypad Mounting Assemblies sold separately

Julian Top Shelf Base Plate with 10" (25.4 cm) Horizontal Channel

16" (40.6 cm) M Series Pivot Arm for Julian accessory track mounting.

10 Degree Tilt Horizontal Channel Mount - 5" (12.7 cm) plate

• 16" (40.6 cm) M-series Pivot Arm
• Extension/IV Pole/Circuit Arm Assembly

• Permits the RAC2 to hang from an M-Series or VHM support arm.
• May be used with included down post or attached directly to the underside of the front end.
• May be swiveled for desired positioning.

The configuration shown is provided for reference only and is not intended to indicate that it is an "approved" configuration.

• Most configurations require the Extended Base option from Dräger.
• For new units: Dräger P/N 8601798
• For retrofit: Dräger P/N 8601824

The configuration shown is provided for reference only and is not intended to indicate that it is an "approved" configuration.

• Most configurations require the Extended Base option from Dräger.
• For new units: Dräger P/N 8601798
• For retrofit: Dräger P/N 8601824

• Mounts to the left side of the Fabius GS to allow mounting of specific GCX M-series arms.
• Also allows mounting of IV Pole GCX P/N DR-0026-10, and the Dräger Fabius GS Circuit Arm.

• Allows Scio to mount below M Series arms.
• Provides swivel adjustment.

Top shelf base plate with 21" (53.3 cm) horizontal channel.

• For use with DR-0026-17 - 16" (40.6 cm) M-series Pivot Arm with 6" (15.2 cm) riser and slide-in mounting plate.
• Provides tilt/swivel adjustments.

For use in horizontal channels.

• Mounts to the left side of the Fabius GS to allow mounting of specific GCX M-series arms.
• Also allows mounting of IV Pole GCX P/N DR-0026-10, and the Dräger Fabius GS Circuit Arm.

• Requires DR-0026-17.
• Provides lateral range of motion and tilt/swivel adjustments at the head of the arm.
• Features a cable management channel beneath the arm and allows attachment of down posts for additional clamp-on components.

Top shelf base plate with 21" (53.3 cm) horizontal channel.

For use in horizontal channels.

• Mounts to the left side of the Fabius GS to allow mounting of specific GCX M-series arms.
• Also allows mounting of IV Pole GCX P/N DR-0026-10, and the Dräger Fabius GS Circuit Arm.

• Allows Vamos to mount below M Series arms.
• Provides swivel adjustment.

Top shelf base plate with 21" (53.3 cm) horizontal channel.

• For use with DR-0026-17 - 16" (40.6 cm) M-series Pivot Arm with 6" (15.2 cm) riser and slide-in mounting plate.
• Provides tilt/swivel adjustments.

For use in horizontal channels.

• Mounts to the left side of the Fabius GS to allow mounting of specific GCX M-series arms.
• Also allows mounting of IV Pole GCX P/N DR-0026-10, and the Dräger Fabius GS Circuit Arm.

• Requires DR-0026-17.
• Provides lateral range of motion and tilt/swivel adjustments at the head of the arm.
• Features a cable management channel beneath the arm and allows attachment of down posts for additional clamp-on components.

Top shelf base plate with 21" (53.3 cm) horizontal channel.

For use in horizontal channels.

• Mounts to the left side of the Fabius GS to allow mounting of specific GCX M-series arms.
• Also allows mounting of IV Pole GCX P/N DR-0026-10, and the Dräger Fabius GS Circuit Arm.

• Requires DR-0026-17.
• Provides lateral range of motion and tilt/swivel adjustments at the head of the arm.
• Features a cable management channel beneath the arm and allows attachment of down posts for additional clamp-on components.

• Allows Scio to mount below M Series arms.
• Provides swivel adjustment.

• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle
• Dual pivoting extension is ideal for obtaining additional reach or clearance for access
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• VESA® FDMI™ 75/100 mm compatible
• Optimal weight range: 22 - 40 lbs/10 - 18.1 kg
• Flat Panel Maximum Load: 30 lbs/13.6 kg
• Total Arm Maximum Load: 40 lbs/18.1 kg

NOTE: Channel sold separately

• Mounts to the left side of the Fabius GS to allow mounting of specific GCX M-series arms.
• Also allows mounting of IV Pole GCX P/N DR-0026-10, and the Dräger Fabius GS Circuit Arm.

• Requires DR-0026-17.
• Provides lateral range of motion and tilt/swivel adjustments at the head of the arm.
• Features a cable management channel beneath the arm and allows attachment of down posts for additional clamp-on components.

• Allows Vamos to mount below M Series arms.
• Provides swivel adjustment.

• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle
• Dual pivoting extension is ideal for obtaining additional reach or clearance for access
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• VESA® FDMI™ 75/100 mm compatible
• Optimal weight range: 22 - 40 lbs/10 - 18.1 kg
• Flat Panel Maximum Load: 30 lbs/13.6 kg
• Total Arm Maximum Load: 40 lbs/18.1 kg

NOTE: Channel sold separately

• Mounts to the left side of the Fabius GS to allow mounting of specific GCX M-series arms.
• Also allows mounting of IV Pole GCX P/N DR-0026-10, and the Dräger Fabius GS Circuit Arm.

• Requires DR-0026-17.
• Provides lateral range of motion and tilt/swivel adjustments at the head of the arm.
• Features a cable management channel beneath the arm and allows attachment of down posts for additional clamp-on components.

• Allows Scio to mount below M Series arms.
• Provides swivel adjustment.

• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle
• Dual pivoting extension is ideal for obtaining additional reach or clearance for access
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• VESA® FDMI™ 75/100 mm compatible
• Optimal weight range: 22 - 40 lbs/10 - 18.1 kg
• Flat Panel Maximum Load: 30 lbs/13.6 kg
• Total Arm Maximum Load: 40 lbs/18.1 kg

NOTE: Channel sold separately

• Mounts to the left side of the Fabius GS to allow mounting of specific GCX M-series arms.
• Also allows mounting of IV Pole GCX P/N DR-0026-10, and the Dräger Fabius GS Circuit Arm.

• Requires DR-0026-17.
• Provides lateral range of motion and tilt/swivel adjustments at the head of the arm.
• Features a cable management channel beneath the arm and allows attachment of down posts for additional clamp-on components.

• Allows Vamos to mount below M Series arms.
• Provides swivel adjustment.

• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle
• Dual pivoting extension is ideal for obtaining additional reach or clearance for access
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• VESA® FDMI™ 75/100 mm compatible
• Optimal weight range: 22 - 40 lbs/10 - 18.1 kg
• Flat Panel Maximum Load: 30 lbs/13.6 kg
• Total Arm Maximum Load: 40 lbs/18.1 kg

NOTE: Channel sold separately

• Mounts to the left side of the Fabius GS to allow mounting of specific GCX M-series arms.
• Also allows mounting of IV Pole GCX P/N DR-0026-10, and the Dräger Fabius GS Circuit Arm.

• Requires DR-0026-17.
• Provides lateral range of motion and tilt/swivel adjustments at the head of the arm.
• Features a cable management channel beneath the arm and allows attachment of down posts for additional clamp-on components.

• Allows Scio to mount below M Series arms.
• Provides swivel adjustment.

• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle
• Dual pivoting extension is ideal for obtaining additional reach or clearance for access
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• VESA® FDMI™ 75/100 mm compatible
• Optimal weight range: 22 - 40 lbs/10 - 18.1 kg
• Flat Panel Maximum Load: 30 lbs/13.6 kg
• Total Arm Maximum Load: 40 lbs/18.1 kg

NOTE: Channel sold separately

• Mounts to the left side of the Fabius GS to allow mounting of specific GCX M-series arms.
• Also allows mounting of IV Pole GCX P/N DR-0026-10, and the Dräger Fabius GS Circuit Arm.

• Requires DR-0026-17.
• Provides lateral range of motion and tilt/swivel adjustments at the head of the arm.
• Features a cable management channel beneath the arm and allows attachment of down posts for additional clamp-on components.

• Allows Vamos to mount below M Series arms.
• Provides swivel adjustment.

• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle
• Dual pivoting extension is ideal for obtaining additional reach or clearance for access
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• VESA® FDMI™ 75/100 mm compatible
• Optimal weight range: 22 - 40 lbs/10 - 18.1 kg
• Flat Panel Maximum Load: 30 lbs/13.6 kg
• Total Arm Maximum Load: 40 lbs/18.1 kg

NOTE: Channel sold separately

• 30 lb/13.6 kg counterweight for a GCX Channel
• Weight is concealed by a painted (off-white) sheet metal cover for easy cleaning and aesthetic appearance

• Mounts to the left side of the Fabius GS to allow mounting of specific GCX M-series arms.
• Also allows mounting of IV Pole GCX P/N DR-0026-10, and the Dräger Fabius GS Circuit Arm.

• For use with DR-0026-17 - 16" (40.6 cm) M-series Pivot Arm with 6" (15.2 cm) riser and slide-in mounting plate.
• Provides tilt/swivel adjustments.

• Allows Frame Unit to be conveniently positioned below the arm.
• Swivel adjustment provided for positioning.

• 30 lb/13.6 kg counterweight for a GCX Channel
• Weight is concealed by a painted (off-white) sheet metal cover for easy cleaning and aesthetic appearance

• Mounts to the left side of the Fabius GS to allow mounting of specific GCX M-series arms.
• Also allows mounting of IV Pole GCX P/N DR-0026-10, and the Dräger Fabius GS Circuit Arm.

Top shelf base plate with 21" (53.3 cm) horizontal channel.

• For use with DR-0026-17 - 16" (40.6 cm) M-series Pivot Arm with 6" (15.2 cm) riser and slide-in mounting plate.
• Provides tilt/swivel adjustments.

Mounting adapter for Frame Unit.

For use in horizontal channels.