• Top Shelf Base Plate with Camlock rails
• Aespire Arm Monitor Mount
• Mounting Adapter

Camlock compatible mounting plate.  Allows G5 to be mounted on top of machine. 

• Aespire vent arm mounting kit
• Aespire top shelf plate with horizontal channel
• Brackets to mount (2) module housings to top shelf
• Power supply holsters to mount behind vent display, or top shelf (shown), or to right side dovetail track.

• AS/3, S/5, IMM Compact Monitor compatible
• Base/Casters/Post assembly
• 6" Utility Basket with cord loops
• Handle and Counterweight 
• Requires mounting adapter, Datex Ohmeda P/N: 887053.

• Base/Casters/Post assembly
• 6" Utility Basket with cord loops
• Handle and Counterweight 
• Requires mounting adapter, Datex Ohmeda P/N: 890915.

• Light Monitor mounted on a counter top mount.
• Requires mounting adapter, Datex Ohmeda P/N: 890915.

• Base/Casters/Post assembly
• 6" Utility Basket with cord loops
• Handle and Counterweight 
• Mounting adapter supplied with monitor.

• Cardiocap 5 mounted on a counter top mount.
• Mounting adapter supplied with monitor.

• Flush mount permits mounting in areas with limited clearance and/or space
• Provides 5.3”/13.5 cm clearance from the wall
• Tilt and swivel adjustment
• VESA® FDMI™ 75/100 mm compatible
• Tilt Mechanism Maximum Load: 30 lbs/13.6 kg
• Product weight: 1.5 lbs/.7 kg

NOTE:  Channel sold separately

• Dual channel columns allow standard GCX wall mounting solutions to be used for ceiling mount applications
• Features two channel profiles to mount arms and accessories plus two side raceways with covers for cable management
• Port hole at the top allows cables to be rundown the anchorage pipe and inside the column
• Pass-through access port in the channel profile area allows cable access from inside the column and to both sides
• Mounts to 1.5"/3.8 cm NPT pipe
• Channel profiles can easily be positioned for left/right or front/back orientation to accommodate different arm combinations and application requirements
• 100 lbs./45.4 kg maximum load at channel profile (flush to column)
• 50 lbs/22.7 kg maximum load 24"/61 cm from the channel profile*
• Two side raceway covers (field cut to desired length)
• 360 degree swivel adjustment for optimal positioning

NOTE:  Assumes adequate anchorage of column. Adequate anchorage is the responsibility of the purchaser.

• Aespire Arm Mount for Flat Panel Display
• 75 to 100 mm VESA Flat Panel Mounting Adapter
• Bracket for Remote Speedpoint and External Alert Device (allows left or right side mounting)
• Aespire Arm Down Post Kit for 1 or 2 FMS
• Top Shelf Base Plate with Camlock rails
• Lower Right Side Channel & Counterweight.
• Kit works with 15" (38.1 cm) or 17" (43.2 cm) flat panel displays.

• Aespire Vent Arm Mounting Kit
• Aespire Top Shelf Plate with Camlock Rails
• Aespire Vent Arm Downpost Kit for FMS

Camlock compatible mounting plate.  Allows G5 to be mounted on top of machine. 

• Top Shelf Plate with 21" (53.3 cm) Channel
• Shown with unpainted plate -  plate is painted to match ADU enclosure

• Compatible with both 'Dovetail' Utility Channels
• Spans between two dovetail channels on machine.
• This assembly is compatible with both the Ohmeda and Dameca
  Dovetail Channels. 

Note: Do not use on upper left side of ADU machine

55 lbs/25 kg counterweight

• Provides lateral positioning, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle
• Designed for use on the right side of Anesthesia Machines
• Includes a stop screw that can be used to limit the rotation on the rear pivot right

• Top shelf base plate
• Camlock rails for top shelf mounting solutions

• Top shelf base plate
• 10" (25.4 cm) channel compatible with GCX mounting solutions

• 12" (30.4 cm) x12" (30.4 cm) M Series Articulating Arm with Down Post for mounting the Flexible Module Server (FMS)
• Top shelf base plate with camlock rails for AGM
• Aisys display mounting bracket for MP90
• Bracket for Remote Speedpoint and External Alert Device (allows left or right side mounting)

• Allows G5 to be mounted directly above the MP90 CPU
• Requires Philips table top mount for the G5
• Plate with Camlock rails not included

• VHM variable height support arm with 16"/40.6cm rear extension allows vertical and lateral positioning plus tilt/swivel adjustments.  Arm mounts directly to the side of the anesthesia machine
• Camlock mount allows G5 or AGM to be positioned on top shelf.
• Counterweight for lower right side

• 12"/30.5cm X 12"/30.5cm M-Series articulating arm with 6"/15.2cm down post for flexible module server (FMS)
• Monitor mounting bracket
• Camlock mounting plate for the EGM
• Top plate with camlock rails for mounting AGM or EGM

• Vent Arm Plate for Flat Panel Display
• 75 to 100 mm VESA Flat Panel Mounting Adapter
• Bracket for Remote Speedpoint and External Alert Device (allows left or right side mounting)
• Vent Arm Down Post Mount for 1 or 2 FMS
• Top Shelf Base Plate with Camlock rails
• Dual Dovetail Channel & Counterweight
• Kit works with 15" (38.1 cm) or 17" (43.2 cm) flat panel display

• Allows G5 to be mounted directly above the MP90 CPU
• Requires Philips table top mount for the G5
• Plate with Camlock rails not included

• AS/3, S/5, IMM Compact Monitor mounted on a counter top mount.
• Requires mounting adapter, Datex Ohmeda P/N: 887053.

• Flush mount pan with integrated spill shield.
• CPU may be vertically (front panel up/down) or horizontally oriented (front panel left/right) - picture shows vertical orientation, front panel up.
• Durable powder coat paint finish.
• For rails 8-10 mm x 25-30 mm also use GCX P/N: 10M-0002-02 6" (15.2 cm) Rail Channel w/Wall Stop.
• Contact GCX for dual rail system solutions.

Camlock compatible mounting plate*

* Plate requires quick release Table Top mounting hardware included with EGM.

• Mounts to top surface of Aespire or Avance.
• Compatible with Philips camlock-mounted devices.

Channel mounts to lower right side of anesthesia machine

• VHM™ Variable height support arm with Down Post for Flexible Module Server (FMS).
• Allows vertical and lateral positioning plus provides tilt/swivel adjustments.
• Includes: Bracket for Remote Speedpoint and External Alert Device (allows left or right side mounting), 75/100 mm VESA Flat Panel Mounting Adapter, and Channel Cover.
• Works with 15" (38.1 cm) (shown) and 17" (43.2 cm) Flat Panels - click on picture to see 17".
• Bracket for FP display power supply supplied by Philips - If display is not acquired from Philips, use power supply mount, GCX P/N WM-0024-03

Channel Sold Separately 

MP90 CPU mount sold separately: GCX P/N: AG-0019-85

• Top Shelf Base Plate with Camlock rails
• Camlock Tilt/Swivel mount
• Pivoting Vent Arm with Down Post for Flexible Module Server (FMS) (can be mounted horizontally or vertically)
• MP 60/70 Mounting Adapter

• Cardiocap 5 mounted on a "Pivot Arm" wall mount.
• Mounting adapter supplied with monitor.

• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• VESA® FDMI™ 75/100 mm compatible
• Maximum Load: 30 lbs/13.6 kg

NOTE:
Channel sold separately

• 8" (20.3 cm) x 8" (20.3 cm) M Series Articulating Arm with Down Post for mounting the Flexible Module Server (FMS)
• Top shelf base plate with camlock rails
• Horizontal channel mount for G5
• Stack mount for MP90
• Bracket for Remote Speedpoint and External Alert Device (allows left or right side mounting)
• Flush channel mount for MP 90 CPU

• Pivot Arm offers swivel/tilt adjustments and two (2) pivot points for lateral adjustability
• Features range of motion from flush to full extension, and cable management
• VESA® FDMI™ 75/100 mm compatible
• Tilt Mechanism Maximum Load: 30 lbs/13.6 kg
• Total Arm Maximum Load: 60 lbs/27.2 kg
• Product weight: 3 lbs/1.4 kg

NOTE: Channel sold separately

• AS/3, S/5, IMM Compact Monitor mounted on a "Pivot Arm" wall mount.
• Requires mounting adapter, Datex Ohmeda P/N: 887053.

• Light Monitor mounted on a "Pivot Arm" wall mount.
• Requires mounting adapter Datex Ohmeda P/N: 890915.

• Pivoting Vent Arm Monitor Mount
• Pivoting Vent Arm Mount with Down Post for Flexible Module Server (FMS) (can be mounted horizontally or vertically) 
• Mounting Adapter
• Top Shelf Base Plate with Camlock rails also included with kit

Camlock compatible mounting plate.  Allows G5 to be mounted on top of machine. 

• 30 lb/13.6 kg counterweight for a GCX Channel
• Weight is concealed by a painted (off-white) sheet metal cover for easy cleaning and aesthetic appearance

Camlock compatible mounting plate*

* Plate requires quick release Table Top mounting hardware included with EGM.

• Provides height and lateral adjustment of device position, and tilt and swivel of device.
• Down post is included for mounting the FMS.

NOTE: For left side only - rotation toward the rear is limited to maintain stability of the anesthesia machine.

• Mounts to top surface of Aespire or Avance.
• Compatible with Philips camlock-mounted devices.

17" (43.2 cm) Vertical Mounting Channel and Backing Plate for Lower Right Side of Datex-Ohmeda Aespire / Avance Anesthesia Machine.

• Pivoting Vent Arm Monitor Mount
• Mounting Adapter
• Top Shelf Base Plate with Camlock rails

Camlock compatible mounting plate.  Allows G5 to be mounted on top of machine. 

• VHM Variable Height Arm provides vertical & lateral positioning and tilt & swivel adjustments.
• Also requires DX-0010-16 Adapter Plate

• Camlock mount for G5
• 16"/40.6 cm tilt/swivel M Series arm for Philips IntelliVue Monitor
• 6"/15.2 cm fluted down post for FMS (shown only for MP60/70 IntelliVue Monitor)

• Top shelf base plate with camlock rails
• G5 camlock stack mount for MP 20/30 or MP 40/50 or MP 60/70

• 8" x 8" articulating arm with 6" (15.2 cm) down post for mounting the Flexible Module Server FMS

Adapter permits mounting to a GCX slide-on mounting plate.

Aestiva Data Arm Mounting Plate

Camlock compatible mounting plate*

* Plate requires quick release Table Top mounting hardware included with EGM.

• Mounts to top surface of Aespire or Avance.
• Compatible with Philips camlock-mounted devices.

• Provides height and lateral adjustment of device position, and tilt and swivel of the device.
• Down post is included for mounting the MMS.

For Use Without Shelf Extension Kits

• Camlock mount for G5
• 16"/40.6 cm tilt/swivel M Series arm for Philips IntelliVue Monitor
• 6"/15.2 cm fluted down post for FMS (shown only for MP60/70 IntelliVue Monitor)

• GCX Channel adapts to single dovetail profile on Datex-Ohmeda anesthesia machines
• Allows use of GCX channel solutions

• Top shelf base plate with camlock rails
• G5 camlock stack mount for MP 20/30 or MP 40/50 or MP 60/70

Camlock compatible mounting plate*

* Plate requires quick release Table Top mounting hardware included with EGM.

• Mounts to top surface of Aespire or Avance.
• Compatible with Philips camlock-mounted devices.

• Provides height and lateral adjustment of device position, and tilt and swivel of the device.
• Down post is included for mounting the MMS.

• Aestiva vent arm mounting kit
• Top shelf plate with horizontal channel
• Brackets to mount (3) module housings to top shelf
• Dual power supply mount for right side
• Counterweight kit for right side

• Camlock mount for G5
• 16"/40.6 cm tilt/swivel M Series arm for Philips IntelliVue Monitor
• 6"/15.2 cm fluted down post for FMS (shown only for MP60/70 IntelliVue Monitor)

• Top shelf base plate with camlock rails
• G5 camlock stack mount for MP 20/30 or MP 40/50 or MP 60/70

• Aestiva vent arm mounting kit
• Top shelf plate with horizontal channel
• Brackets to mount (2) module housings to top shelf
• (2) power supply holsters to mount on top (shown) or to right side.

• GCX Channel adapts to single dovetail profile on Datex-Ohmeda anesthesia machines
• Allows use of GCX channel solutions

• Provides height and lateral adjustment of device position, and tilt and swivel of the device.
• An additional mounting adapter may be required to fit the monitor.

Adapter permits mounting to a GCX slide-on mounting plate.

• Permits the RAC4A to hang from an M-Series or VHM support arm.
• May be used with included down post or attached directly to the underside of the front end.
• Provides swivel adjustment.

Permits second RAC4A to be added to ME-0017-96 or ME-0017-78.

• VHM(tm) variable height arm provides 17" (43.2 cm) vertical range of motion and +/- 90 lateral positioning.
• Tilt/swivel adjustment are provided at the head of the arm.
• Includes Cable Cover.

• GCX Channel adapts to single dovetail profile on Datex-Ohmeda anesthesia machines
• Allows use of GCX channel solutions

Channel mounts to lower right side of anesthesia machine

Permits PRN50 to be mounted in a wall channel, on a short arm.

For Use Without Shelf Extension Kits

• GCX Channel adapts to single dovetail profile on Datex-Ohmeda anesthesia machines
• Allows use of GCX channel solutions

• 13"/33 cm Channel adapts to single dovetail profile present in many Datex-Ohmeda anesthesia machines, new and old.
• Allows use of standard GCX wall mount solutions.

• Right Side Dovetail Channel (spans between the two dovetail channels).
• 3 Vaporizer Aestiva: Upper right side has only a single dovetail - Use OH-0010-80

• Permits the RAC4A to hang from an M-Series or VHM support arm.
• May be used with included down post or attached directly to the underside of the front end.
• Provides swivel adjustment.

Permits second RAC4A to be added to ME-0017-96 or ME-0017-78.

The slide may be located in multiple positions allowing different orientations of the base unit in the Channel.

• VHM(tm) variable height arm provides 17" (43.2 cm) vertical range of motion and +/- 90 lateral positioning.
• Tilt/swivel adjustment are provided at the head of the arm.
• Includes Cable Cover.

• GCX Channel adapts to single dovetail profile on Datex-Ohmeda anesthesia machines
• Allows use of GCX channel solutions

Channel mounts to lower right side of anesthesia machine

Permits PRN50 to be mounted in a wall channel, on a short arm.

• Mounts to top surface of Aespire or Avance.
• Includes horizontal channel.

Permits RAC4A to be used on a GCX mounting plate.

For use in horizontal channels.

• Provides height and lateral adjustment of device position, and tilt and swivel of the device.
• An additional mounting adapter may be required to fit the monitor.

• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• VESA® FDMI™ 75/100 mm compatible
• Maximum Load: 30 lbs/13.6 kg

NOTE:
Channel sold separately

• GCX Channel adapts to single dovetail profile on Datex-Ohmeda anesthesia machines
• Allows use of GCX channel solutions

• Secures two (2) power supplies side by side.
• Each holster holds a power supply
• Max size: 4" (10.2 cm) x 4" (10.2 cm) - 16" (40.6 cm) total perimeter.
• Min size: 2.4" (6.1 cm) x 1.3" (3.3 cm) - 7.4" (18.8 cm) total perimeter.

• Mounts to top surface of Aespire or Avance.
• Includes horizontal channel.

Permits gas monitor to be mounted in a horizontal channel.

• Universal holster to securely mount a variety of power supply units.
• Max size: 4" (10.2 cm) x 4" (10.2 cm) - 16" (40.6 cm) total perimeter.
• Min size: 2.4" (6.1 cm) x 1.3" (3.3 cm) - 7.4" (18.8 cm) total perimeter.
• Can be vertically or horizontally oriented.
• Includes cable cleat for cord storage.

• Permits two 90364, 90387, 90491 (Double Wide Housings) or 90485 & 90499 (Single Wide Housings) to be mounted under an M or VHM series flat panel arm.
• Includes spacer posts to accommodate a variety of flat panel sizes.

Note: Additional hardware is required from SpaceLabs to attach the Double Wide Housings (Spacelabs Kit# 016-0429-00) & Single Wide Housings (Spacelabs Kit# 016-0342-00)

Mounting Adapter For Spacelabs 91370 (SL2600), 91369 (SL2400), 90369 (UV1050) and 91220 (mCare 300)

• Hanger assembly with optional 6" (15.2 cm) down post
• Single hook attachment for cable management
• Gas module adapter plate

• 16"/40.6 cm M-Series Arm allows lateral positioning, tilt/swivel adjustments, and cable management.
• Pivot stop limits rear rotation
• Utility cable hooks
• 5"/12.7 cm slide in plate
• Channel covers for cable management