• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• VESA® FDMI™ 75/100 mm compatible
• Maximum Load: 30 lbs/13.6 kg

NOTE:
Channel sold separately

• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle
• Dual pivoting extension is ideal for obtaining additional reach or clearance for access
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• VESA® FDMI™ 75/100 mm compatible
• Optimal weight range: 5 - 22 lbs/2.3 - 10 kg
• Total Arm Maximum Load: 30 lbs/13.6 kg

NOTE:
Channel sold separately

• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle
• Dual pivoting extension is ideal for obtaining additional reach or clearance for access
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• VESA® FDMI™ 75/100 mm compatible
• Optimal weight range: 5 - 22 lbs/2.3 - 10 kg
• Total Arm Maximum Load: 30 lbs/13.6 kg

NOTE:
Channel sold separately

• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle
• Dual pivoting extension is ideal for obtaining additional reach or clearance for access
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• VESA® FDMI™ 75/100 mm compatible
• Optimal weight range: 5 - 22 lbs/2.3 - 10 kg
• Total Arm Maximum Load: 30 lbs/13.6 kg

NOTE:
Channel sold separately

• Pivot Arm offers swivel/tilt adjustments and two (2) pivot points for lateral adjustability
• Features range of motion from flush to full extension, and cable management
• VESA® FDMI™ 75/100 mm compatible
• Tilt Mechanism Maximum Load: 30 lbs/13.6 kg 
• Total Arm Maximum Load: 60 lbs/27.2 kg
• Product weight: 2.8 lbs/1.3 kg

NOTE: Channel sold separately

• Pivot Arm offers swivel/tilt adjustments and two (2) pivot points for lateral adjustability
• Features range of motion from flush to full extension, and cable management
• VESA® FDMI™ 75/100 mm compatible
• Tilt Mechanism Maximum Load: 30 lbs/13.6 kg
• Total Arm Maximum Load: 60 lbs/27.2 kg
• Product weight: 3 lbs/1.4 kg

NOTE: Channel sold separately

• Pivot Arm offers swivel/tilt adjustments and two (2) pivot points for lateral adjustability
• Features range of motion from flush to full extension, and cable management
• VESA® FDMI™ 75/100 mm compatible
• Tilt Mechanism Maximum Load: 30 lbs/13.6 kg 
• Total Arm Maximum Load: 60 lbs/27.2 kg
• Product weight: 3.5 lbs/1.6 kg

NOTE:
Channel sold separately

• Ideal for flush mounted applications with limited space
• Provides 1.6"/4.1 cm clearance from the wall
• No swivel or tilt capability
• VESA® FDMI™ 75/100 mm compatible
• Product weight: 1 lbs/.5 kg

NOTE:  No swivel or tilt capability.  Channel sold separately

• Flush mount permits mounting in areas with limited clearance and/or space
• Provides 5.3”/13.5 cm clearance from the wall
• Tilt and swivel adjustment
• VESA® FDMI™ 75/100 mm compatible
• Tilt Mechanism Maximum Load: 30 lbs/13.6 kg
• Product weight: 1.5 lbs/.7 kg

NOTE:  Channel sold separately

• Tilt/Swivel Mount for larger flat panel displays with a weight limit of
  100 lbs/45.4 kg
• Provides 7”/17.8 cm clearance from the wall
• VESA® FDMI™ compatible with flat panels with these M6 hole patterns:
  100 x 300mm, 200 x 200mm, 200 x 400mm  and
  M4 hole patterns:  100 x 100mm, 100 x 200mm, 100 x 300mm
• Product weight: 8 lbs/3.6 kg

NOTE:  Accommodates wall channels and dual channel counter top and ceiling mount posts (consider overall load and load limits)

• Articulating Arm offers swivel/tilt adjustments and three (3) pivot points for lateral adjustability
• Features range of motion from flush to full extension, and cable management
• VESA® FDMI™ 75/100 mm compatible
• Tilt Mechanism Maximum Load: 30 lbs/13.6 kg
• Product weight: 4 lbs/1.8 kg

NOTE:
Channel sold separately

• 8" (20.3 cm) x 8" (20.3 cm) M Series Articulating Arm pivots at the channel and midway for lateral positioning and extension.
• Features swivel adjustment at the head of the arm, range of motion from flush to full extension, and cable management.

• Articulating Arm offers swivel/tilt adjustments and three (3) pivot points for lateral adjustability
• Features range of motion from flush to full extension, and cable management
• VESA® FDMI™ 75/100 mm compatible
• Tilt mechanism maximum Load: 30 lbs/13.6 kg
• Product weight: 4.8 lbs/2.2 kg

NOTE:  Channel sold separately

• Articulating Arm offers swivel/tilt adjustments and three (3) pivot points for lateral adjustability
• Features range of motion from flush to full extension, and cable management
• VESA® FDMI™ 75/100 mm compatible
• Tilt Mechanism Maximum Load: 30 lbs/13.6 kg
• Product weight: 5 lbs/2.3 kg

NOTE:
Channel sold separately

• The bracket attaches to a support arm (M-Series, or VHM Variable Height Arm) or roll stand allowing two (2) flat panel displays to be mounted side-by-side.
• Horizontal spread adjustment accommodates displays with enclosures up to 21"/53.3 cm in width.
• Provides swivel at connection point to arm (not a roll stand) and independent tilt/swivel adjustments for each display screen.
• Product weight: 5.5 lbs/2.5 kg

• Provides Swivel (+/- 20 degrees or 360 degrees) adjustment
• Ideal for applications with limited space
• Product weight: 1 lbs/.5 kg

Note:  Channel sold separately

• *(Optional: In Place of FLP-0008-11)
• The bracket attaches to a support arm (M-Series, or VHM Variable Height Arm) or roll stand allowing two (2) flat panel displays to be mounted side-by-side.
• Horizontal spread adjustment accommodates displays with enclosures 22"/55.9 to 26"/66 cm in width.
• Provides swivel at connection point to arm (not a roll stand) and independent tilt/swivel adjustments for each display screen.

• 8"/20.3 cm M Series Pivot Arm offers a pivot point at the wall channel for lateral adjustability and swivel adjustment.
• Features range of motion from flush to full extension, and cable management.

• The bracket attaches to a support arm (M-Series, or VHM Variable Height Arm) or roll stand allowing two (2) flat panel displays to be mounted side-by-side.
• Horizontal spread adjustment accommodates displays with enclosures up to 21"/53.3 cm in width.
• Provides swivel at connection point to arm (not a roll stand) and independent tilt/swivel adjustments for each display screen.
• Product weight: 5.5 lbs/2.5 kg

• *(Optional: In Place of FLP-0008-11)
• The bracket attaches to a support arm (M-Series, or VHM Variable Height Arm) or roll stand allowing two (2) flat panel displays to be mounted side-by-side.
• Horizontal spread adjustment accommodates displays with enclosures 22"/55.9 to 26"/66 cm in width.
• Provides swivel at connection point to arm (not a roll stand) and independent tilt/swivel adjustments for each display screen.

• The bracket attaches to a support arm (M-Series, or VHM Variable Height Arm) or roll stand allowing two (2) flat panel displays to be mounted side-by-side.
• Horizontal spread adjustment accommodates displays with enclosures up to 21"/53.3 cm in width.
• Provides swivel at connection point to arm (not a roll stand) and independent tilt/swivel adjustments for each display screen.
• Product weight: 5.5 lbs/2.5 kg

• 12"/30.5 cm Pivot Arm - M Series (Swivel)
• Offers a pivot point at the wall channel for lateral adjustability and swivel adjustment.
• Features range of motion from flush to full extension, and cable management.

• *(Optional: In Place of FLP-0008-11)
• The bracket attaches to a support arm (M-Series, or VHM Variable Height Arm) or roll stand allowing two (2) flat panel displays to be mounted side-by-side.
• Horizontal spread adjustment accommodates displays with enclosures 22"/55.9 to 26"/66 cm in width.
• Provides swivel at connection point to arm (not a roll stand) and independent tilt/swivel adjustments for each display screen.

• The bracket attaches to a support arm (M-Series, or VHM Variable Height Arm) or roll stand allowing two (2) flat panel displays to be mounted side-by-side.
• Horizontal spread adjustment accommodates displays with enclosures up to 21"/53.3 cm in width.
• Provides swivel at connection point to arm (not a roll stand) and independent tilt/swivel adjustments for each display screen.
• Product weight: 5.5 lbs/2.5 kg

• 16"/40.6 cm Pivot Arm - M Series (Swivel) 
• Offers a pivot point at the wall channel for lateral adjustability and swivel adjustment.
• Features range of motion from flush to full extension, and cable management.

• *(Optional: In Place of FLP-0008-11)
• The bracket attaches to a support arm (M-Series, or VHM Variable Height Arm) or roll stand allowing two (2) flat panel displays to be mounted side-by-side.
• Horizontal spread adjustment accommodates displays with enclosures 22"/55.9 to 26"/66 cm in width.
• Provides swivel at connection point to arm (not a roll stand) and independent tilt/swivel adjustments for each display screen.

• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel adjustments for optimal viewing angle
• Dual pivoting extension is ideal for obtaining additional reach or clearance for access
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• Optimal weight range: 5 - 22 lbs/2.3 - 10 kg
• Maximum Load: 30 lbs/13.6 kg
• Product weight: 8.5 lbs/3.9 kg

NOTE:  Channel sold separately

• The bracket attaches to a support arm (M-Series, or VHM Variable Height Arm) or roll stand allowing two (2) flat panel displays to be mounted side-by-side.
• Horizontal spread adjustment accommodates displays with enclosures up to 21"/53.3 cm in width.
• Provides swivel at connection point to arm (not a roll stand) and independent tilt/swivel adjustments for each display screen.
• Product weight: 5.5 lbs/2.5 kg

• *(Optional: In Place of FLP-0008-11)
• The bracket attaches to a support arm (M-Series, or VHM Variable Height Arm) or roll stand allowing two (2) flat panel displays to be mounted side-by-side.
• Horizontal spread adjustment accommodates displays with enclosures 22"/55.9 to 26"/66 cm in width.
• Provides swivel at connection point to arm (not a roll stand) and independent tilt/swivel adjustments for each display screen.

• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel adjustments for optimal viewing angle
• Dual pivoting extension is ideal for obtaining additional reach or clearance for access
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• Optimal weight range: 22 - 40 lbs/10 - 18.1 kg
• Maximum Load: 40 lbs/18.1 kg

NOTE:
Channel sold separately

• The bracket attaches to a support arm (M-Series, or VHM Variable Height Arm) or roll stand allowing two (2) flat panel displays to be mounted side-by-side.
• Horizontal spread adjustment accommodates displays with enclosures up to 21"/53.3 cm in width.
• Provides swivel at connection point to arm (not a roll stand) and independent tilt/swivel adjustments for each display screen.
• Product weight: 5.5 lbs/2.5 kg

• *(Optional: In Place of FLP-0008-11)
• The bracket attaches to a support arm (M-Series, or VHM Variable Height Arm) or roll stand allowing two (2) flat panel displays to be mounted side-by-side.
• Horizontal spread adjustment accommodates displays with enclosures 22"/55.9 to 26"/66 cm in width.
• Provides swivel at connection point to arm (not a roll stand) and independent tilt/swivel adjustments for each display screen.

• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel adjustments for optimal viewing angle
• Dual pivoting extension is ideal for obtaining additional reach or clearance for access
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• VESA® FDMI™ 75/100 mm compatible
• Optimal weight range: 5 - 22 lbs/2.3 - 10 kg
• Maximum Load: 30 lbs/13.6 kg

NOTE:  Channel sold separately

• The bracket attaches to a support arm (M-Series, or VHM Variable Height Arm) or roll stand allowing two (2) flat panel displays to be mounted side-by-side.
• Horizontal spread adjustment accommodates displays with enclosures up to 21"/53.3 cm in width.
• Provides swivel at connection point to arm (not a roll stand) and independent tilt/swivel adjustments for each display screen.
• Product weight: 5.5 lbs/2.5 kg

• *(Optional: In Place of FLP-0008-11)
• The bracket attaches to a support arm (M-Series, or VHM Variable Height Arm) or roll stand allowing two (2) flat panel displays to be mounted side-by-side.
• Horizontal spread adjustment accommodates displays with enclosures 22"/55.9 to 26"/66 cm in width.
• Provides swivel at connection point to arm (not a roll stand) and independent tilt/swivel adjustments for each display screen.

• The bracket attaches to a support arm (M-Series, or VHM Variable Height Arm) or roll stand allowing two (2) flat panel displays to be mounted side-by-side.
• Horizontal spread adjustment accommodates displays with enclosures up to 21"/53.3 cm in width.
• Provides swivel at connection point to arm (not a roll stand) and independent tilt/swivel adjustments for each display screen.
• Product weight: 5.5 lbs/2.5 kg

• Provides lateral positioning, extension, gas spring-assisted height adjustment, and swivel/tilt adjustments for optimal viewing angle
• Dual pivoting extension is ideal for obtaining additional reach or clearance for access
• Features a parallel linkage for constant viewing angle throughout the vertical range of motion
• Vertical motion range +/- 60 degrees with 17”/43.2 cm total travel
• Lateral motion range (from perpendicular to the wall) +/- 90 degrees
• Optimal weight range: 22 - 40 lbs/10 - 18.1 kg
• Maximum Load: 40 lbs/18.1 kg

NOTE:
Channel sold separately

Optional Arms

• WS-0004-38  VHM Extension 12" (30.5 cm) Swivel Only For Dual Flat Panel Display applications. 40 lbs (18.1 kg) Max
• WS-0004-39  VHM Extension 16" (40.6 cm) Swivel Only For Dual Flat Panel Display applications.  40 lbs (18.1 kg) Max

• *(Optional: In Place of FLP-0008-11)
• The bracket attaches to a support arm (M-Series, or VHM Variable Height Arm) or roll stand allowing two (2) flat panel displays to be mounted side-by-side.
• Horizontal spread adjustment accommodates displays with enclosures 22"/55.9 to 26"/66 cm in width.
• Provides swivel at connection point to arm (not a roll stand) and independent tilt/swivel adjustments for each display screen.

• Flush mount permits mounting in areas with limited clearance and/or space
• Provides 5.3”/13.5 cm clearance from the wall
• Tilt and swivel adjustment
• VESA® FDMI™ 75/100 mm compatible
• Tilt Mechanism Maximum Load: 30 lbs/13.6 kg
• Product weight: 1.5 lbs/.7 kg

NOTE:  Channel sold separately

• Vertically mounts 2 VESA (75/100) compatible flat panels with independent tilt/swivel.
• Accommodates displays with enclosures up to 18"/45.7 cm in height.
• Offers a pivot point at the channel for lateral adjustability.
• Features range of motion from flush to full extension, and cable management.

• Ideal application for limited space.  
• Provides swivel and tilt adjustments for optimal viewing angle.
• Compatible with flat panels that offer VESA 100 or 75 mm mounting hole configurations.
• Picture shows 3 separate mounts on one channel.
• Channel width or quantity is based on horizontal space required for display side-to-side clearance.  

Channel(s) sold separately

• Works with GCX flat panel mounts to allow easy position adjustments for the display without having to grab the display enclosure
• Adjustable width to accommodate flat panel displays from 11.5"/29.2 cm - 18.5"/47 cm
• Vertical, lateral and tilt adjustments are facilitated by the padded grips located to the left and right sides
• Padded grip handles can be installed facing up or down
• Mounts between display and GCX mounting plate
• Product weight: 3 lbs/1.4 kg

• Works with GCX flat panel mounts to allow easy position adjustments for the display without having to grab the display enclosure
• Adjustable width to accommodate flat panel displays from 18.5"/47 cm - 24.5"/62 cm
• Vertical, lateral and tilt adjustments are facilitated by the padded grips located to the left and right sides
• Padded grip handles can be installed facing up or down
• Mounts between display and GCX mounting plate
• Product weight: 4 lbs/1.8 kg